Industry Expert Blogs

Normal operation range for a Semiconductor device is not made equal for systems… If you consider a CPU running inside an aircraft engine control system, this device should operate at temperature ranged between -55°C and +125°C, when an Application Processor for smartphone is only required to operate in the 0°C to +70°C range. When Sidense announce that their OTP macros are fully qualified for -40ºC to 150°C read and field-programmable operations for TSMC’s 180nm BCD 1.8/5V/HV and G 1.8/5V processes, this represent a design challenge probably as difficult to meet that, for example, pushing a Cortex A9 ARM CPU embedded in a 28 nm Application Processor to run at 3 GHz instead of 1.5 GHz.

My very first job was in a characterization department and, even if the technology was CMOS 2 micron, the physics’ laws are still the same today, on a 28 nm or 180 nm technology. Both Temperature and Voltage are used to stress Silicon devices, in order to push it to their operating limits much faster. If you increase ambient temperature, a circuit will operate at lower frequency (and performance), and will be degraded much faster. Increasing the operating voltage will also “help” degrading the chip faster.

Click here to read more ...