Bluetooth low energy v5.4 Baseband Controller, Protocol Software Stack and Profiles IP
RF Engines releases a library of high performance FFT Cores for FPGA
The FFT is one of the most popular signal processing algorithms used in modern electronics equipment, and allows a sequence of time-domain samples to be efficiently converted into a frequency representation. RF Engines’ library provides FPGA designers with a source of highly optimised high-speed FFT cores that can be quickly and cost-effectively integrated into a design.
The library is supplied on a single CD, and includes FPGA netlists for a range of FFTs that cover different target devices, transform lengths and sample rates. Cores are provided for Xilinx Spartan III, Virtex II, Virtex II Pro and Virtex 4 FPGA devices, with FFT transform lengths ranging from 32 points, up to 32K points for some device types. Each core can be configured to compute the inverse FFT function, and includes a bit reversal function to allow frequency data to be output in natural order.
Compared to existing FFT generation tools, the FFT library offers options for higher real-time processing speeds, and more silicon efficient options for lower speed requirements. The library also differs from other solutions in the level of support provided to the integrator. Each design includes a bit-true PC simulation, a customised data sheet, and a test bench for the core. Furthermore, the product also includes telephone or email support for integration assistance and advice.
The designs use pipelining techniques that permit the core to run in continuous real-time (streaming I/O) at high sample rates, and two architectures have been used to allow designers to make a trade-off between sample rate and silicon resource usage. The HiSpeed architecture has been used to produce the most silicon efficient cores in the library, and supports complex sample rates up to around 100 MS/s depending on the device type and transform length, whilst cores based on the QuadSpeed architecture support complex sample rates up to 500MS/s in some cases.
RF Engines has used fixed-point arithmetic techniques in order to grow the precision of the data as it progresses through the transform. Thus, for example, a 14-bit integer input grows to around 23-bits by the time it reaches the output of a 32K transform. “Growing” the data in this way ensures that the precision is maintained, whilst use of FPGA resources is kept to a minimum. This approach is markedly different to other available solutions, which use a fixed bit-width from input to output, and often require the designer to sacrifice precision in order to save silicon.
Each core in the library is supplied as an EDIF netlist, and is supplemented with a bit-true Matlab model, a custom data sheet, and a VHDL test bench. The library is supplied with a site-wide licence that permits use for R&D purposes and allows the cores to be shipped in manufactured products.
John Summers, CEO for RF Engines, commented, “Our FFT library provides FPGA designers with a powerful toolkit for quickly adding high speed FFT functionality into designs with the minimum of risk. It includes FFT technology that we have been working for several years to develop and refine, and which has been thoroughly proven in many customer applications. Furthermore, because the library includes such a wide range of cores, and is covered by a simple licensing model, it is likely to be an invaluable investment for future projects.”
RFEL also provides a range of signal processing cores that may be used to complement the FFT cores, including programmable window functions, power conversion, accumulation, CORDIC algorithms, and fixed-to-floating-point conversion. The company’s Distributed Half Band Filter (DHBF) provides an efficient mechanism for converting a digitised signal from an ADC into a complex representation for input to the FFT transform.
To meet more demanding FFT requirements, the company also provides its HyperSpeed FFT cores, which support sample rates up to 3.2 GS/s, and HyperLength FFT cores, which enables transform sizes up to 256M complex points. For applications that require a non-power-of-two transform length, the company provides its Matrix range of mixed-radix DFT designs.
These FFT cores form only one part of the RFEL product portfolio, which also includes complete system-on-chip designs, as well as COTS-based board solutions for a range of high specification applications
RF Engines
RF Engines Limited (RFEL) is a UK based designer, providing high specification signal processing cores, system on chip designs, and FPGA based board solutions for applications in the defence, communications and instrumentation markets. These applications include base stations, wireless and wireline broadband communications systems, satellite communications systems, test and measurement instrumentation, as well as defence systems. More specifically, RFEL is a solutions provider for projects requiring complex front end, real time, wide and narrow band, flexible channelisation. RFEL provides a range of standard cores covering multiple FFT and unique PFT techniques, as well as system design services for specialist applications.
For further information, please see the website at www.rfel.com or contact RF Engines at Innovation Centre, St Cross Business Park, Newport, Isle of Wight, PO30 5WB, Great Britain. Tel +44 (0) 1983 550330.
|
Related News
- OptNgn Releases 264 FFT FPGA Library Elements that are High Performance, Vendor Independent, and Instantly Downloadable
- RF Engines'HyperSpeed Plus offers unprecedented FPGA performance with 52 Giga Samples per Second Pipeline FFT cores
- Efinix Releases Topaz Line of FPGAs, Delivering High Performance and Low Power to Mass Market Applications
- SafeNet Releases Expanded Line of High Performance SafeXcel IP Security Engines
- RF Engines's HyperSpeed and HyperLength FFT Cores dramatically increase performance ranges of FFT
Breaking News
- HPC customer engages Sondrel for high end chip design
- Ubitium Debuts First Universal RISC-V Processor to Enable AI at No Additional Cost, as It Raises $3.7M
- TSMC drives A16, 3D process technology
- Frontgrade Gaisler Unveils GR716B, a New Standard in Space-Grade Microcontrollers
- Blueshift Memory launches BlueFive processor, accelerating computation by up to 50 times and saving up to 65% energy
Most Popular
- Cadence Unveils Arm-Based System Chiplet
- Eliyan Ports Industry's Highest Performing PHY to Samsung Foundry SF4X Process Node, Achieving up to 40 Gbps Bandwidth at Unprecedented Power Levels with UCIe-Compliant Chiplet Interconnect Technology
- TSMC drives A16, 3D process technology
- CXL Fabless Startup Panmnesia Secures Over $60M in Series A Funding, Aiming to Lead the CXL Switch Silicon Chip and CXL IP
- Blueshift Memory launches BlueFive processor, accelerating computation by up to 50 times and saving up to 65% energy
E-mail This Article | Printer-Friendly Page |