English
LSI Samples New Generation of 65nm Physical Layer IP for Hard Disk Drives
New TrueStore PHY8800 transfers data with clean, fast signals for notebook, desktop, and enterprise HDDs
MILPITAS, Calif. -- July 30, 2007 -- LSI Corporation today announced that it has begun shipping sample quantities of its next-generation 65-nanometer multi-interface Physical Layer (PHY) IP for hard disk drives (HDD) in notebook and desktop personal computers as well as enterprise storage systems.
The LSI TrueStore® PHY8800 delivers data transfer rates as high as 6 gigabits per second to support the next-generation Serial ATA (SATA) and Serial Attached SCSI (SAS) interface standards. TrueStore PHYs have best-in-class performance for total transmit jitter and total receive jitter tolerance, both key measurements of noise levels in serial signals. The PHY8800 is compatible with SATA, SAS, and Fibre Channel (FC-PI-2) protocols.
The PHY8800 reduces power consumption by about 10 percent from the previous generation PHY, while doubling the data transfer rates, thereby further reducing power consumption in the HDD while enabling it to communicate much faster with its host. In addition to superior signal processing, the new PHY offers HDD makers improved power performance and test features that simplify debugging. The test features include a firmware-controllable signal analyzer that enables engineers at HDD makers to observe, debug and clean up signals easily without the use of expensive test equipment.
Ruediger Stroh, executive vice president and general manager of the LSI Storage Peripherals Group, said, "The new LSI PHY sets a new benchmark in performance with its superior capability of transmitting an exceptionally clean signal to the host and, in turn, being able to receive extremely noisy data and restore it without errors. The ample performance margins of the PHY8800 offer robust operation in the widest variety of host environments, thus enabling HDD makers to reduce costs and focus on system level design."
Stroh added, "This new PHY has been developed as part of the LSI total recording system design that includes new read channels, ARM® cores, and hard disk controller IP that will be integrated into next generation 65-nm System-on-Chip (SoC). The system is designed as a whole, with LSI preamps, to give HDD makers faster time to market, higher reliability, increased performance and lower overall system power. No other company can offer the breadth of high-performance storage IC products and systems that LSI delivers."
The PHY is a component of an integrated circuit and serves as the electrical interface that performs the data transmission between the HDD and the host.
HDD manufacturers rely on LSI to deliver storage solutions that respond to a rapidly changing market while consistently establishing the industry leading standards in technology.
About LSI
LSI Corporation is a leading provider of innovative silicon, systems and software technologies that enable products which seamlessly bring people, information and digital content together. The company offers a broad portfolio of capabilities and services including custom and standard product ICs, adapters, systems and software that are trusted by the world's best known brands to power leading solutions in the Storage, Networking and Mobility markets. More information is available at http://www.lsi.com.
MILPITAS, Calif. -- July 30, 2007 -- LSI Corporation today announced that it has begun shipping sample quantities of its next-generation 65-nanometer multi-interface Physical Layer (PHY) IP for hard disk drives (HDD) in notebook and desktop personal computers as well as enterprise storage systems.
The LSI TrueStore® PHY8800 delivers data transfer rates as high as 6 gigabits per second to support the next-generation Serial ATA (SATA) and Serial Attached SCSI (SAS) interface standards. TrueStore PHYs have best-in-class performance for total transmit jitter and total receive jitter tolerance, both key measurements of noise levels in serial signals. The PHY8800 is compatible with SATA, SAS, and Fibre Channel (FC-PI-2) protocols.
The PHY8800 reduces power consumption by about 10 percent from the previous generation PHY, while doubling the data transfer rates, thereby further reducing power consumption in the HDD while enabling it to communicate much faster with its host. In addition to superior signal processing, the new PHY offers HDD makers improved power performance and test features that simplify debugging. The test features include a firmware-controllable signal analyzer that enables engineers at HDD makers to observe, debug and clean up signals easily without the use of expensive test equipment.
Ruediger Stroh, executive vice president and general manager of the LSI Storage Peripherals Group, said, "The new LSI PHY sets a new benchmark in performance with its superior capability of transmitting an exceptionally clean signal to the host and, in turn, being able to receive extremely noisy data and restore it without errors. The ample performance margins of the PHY8800 offer robust operation in the widest variety of host environments, thus enabling HDD makers to reduce costs and focus on system level design."
Stroh added, "This new PHY has been developed as part of the LSI total recording system design that includes new read channels, ARM® cores, and hard disk controller IP that will be integrated into next generation 65-nm System-on-Chip (SoC). The system is designed as a whole, with LSI preamps, to give HDD makers faster time to market, higher reliability, increased performance and lower overall system power. No other company can offer the breadth of high-performance storage IC products and systems that LSI delivers."
The PHY is a component of an integrated circuit and serves as the electrical interface that performs the data transmission between the HDD and the host.
HDD manufacturers rely on LSI to deliver storage solutions that respond to a rapidly changing market while consistently establishing the industry leading standards in technology.
About LSI
LSI Corporation is a leading provider of innovative silicon, systems and software technologies that enable products which seamlessly bring people, information and digital content together. The company offers a broad portfolio of capabilities and services including custom and standard product ICs, adapters, systems and software that are trusted by the world's best known brands to power leading solutions in the Storage, Networking and Mobility markets. More information is available at http://www.lsi.com.
|
||||||
Related News
- STMicroelectronics Samples 65nm Multi-Standard Hard Disk Drive Physical Layer IP
- LSI and Seagate Co-develop Technology for Next-Generation High-Capacity Hard Disk Drives
- STMicroelectronics Demonstrates First Physical Layer IP For 6Gb/s SATA Hard Disk Drives
- LSI Sampling Industry's First 28nm System-on-a-Chip to Accelerate Delivery of Higher-Capacity Hard Disk Drives
- LSI Now Shipping in Volume Second-Generation 40nm LDPC Read Channel for Hard Disk Drives
Breaking News
- Jury is out in the Arm vs Qualcomm trial
- Ceva Seeks To Exploit Synergies in Portfolio with Nano NPU
- Synopsys Responds to U.K. Competition and Markets Authority's Phase 1 Announcement Regarding Ansys Acquisition
- Alphawave Semi Scales UCIe™ to 64 Gbps Enabling >20 Tbps/mm Bandwidth Density for Die-to-Die Chiplet Connectivity
- RaiderChip Hardware NPU adds Falcon-3 LLM to its supported AI models
Most Popular
|
E-mail This Article | 
|
|
Printer-Friendly Page |