Actel's SmartFusion Intelligent Mixed Signal FPGAs Target High Complexity Motor Control Solutions
Live Demonstrations at Embedded Systems Conference Silicon Valley Actel Booth #930
MOUNTAIN VIEW, Calif., April 27, 2010 — At the Embedded Systems Conference (ESC) in Silicon Valley on April 26-29, 2010, Actel Corporation (NASDAQ: ACTL) will be displaying SmartFusion™ intelligent mixed signal FPGAs in action, offering a compelling solution for high complexity motor and motion control applications. With SmartFusion's integrated 32-bit ARM® Cortex™-M3 microcontroller, programmable analog, on-chip embedded nonvolatile memory (eNVM) and proven low power flash based FPGA fabric, SmartFusion directly address the challenges of motor control design.
The development of smaller and more powerful motors, along with recent advances in high-energy batteries, has opened new markets to a wide range of motorized products. New designs for AC and DC motor control must be highly efficient and consume little power in order to provide longer operation without affecting performance. The need to adopt smaller, more cost-effective motors in traditional motor applications is also influencing electronic motor control techniques for the industrial sectors. Tremendous technology improvements in semiconductor processes and integration are helping designers face these challenges.
Industry experts are partnering with Actel to leverage the capabilities and strengths of SmartFusion devices for motor control applications to provide solutions to this growing market.
Power and Control Design, Incorporated
Power and Control Design, Incorporated is an industry leader in sophisticated motor control design and works with major customers targeting motor control applications. Power and Control Design is jointly developing SmartFusion intelligent mixed signal FPGA based motor control solutions with Actel and was an early adopter as part of the Actel partner program, developing a suite of reference designs that illustrate the compelling fit realized using SmartFusion devices in high-end motor control applications. The SmartFusion motor control demo developed by Power and Control Design provides sophisticated simultaneous control of up to four Permanent Magnet Synchronous Motors (PMSM). All motors are controlled in trapezoidal and sinusoidal commutation using Hall effect position sensor input, optical encoder position sensor input or a sensorless mode using Back-EMF input to determine motor position and speed.
TRINAMIC Motion Control GmbH & Co. KG
TRINAMIC, the leader in embedded motion control, is building on their experience as an Actel partner program FPGA user and their participation in Actel's SmartFusion Lead Customer Program to offer motor control to their customers. TRINAMIC has developed a variety of motor control solutions to solve high-complexity, space-limited motor control challenges. By taking advantage of SmartFusion's unique feature set, TRINAMIC created a BLDC motor control block unit for high speed commutation. This unit is a functional block coded in VHDL, with control via register access from the SmartFusion 32-bit ARM Cortex-M3 processor. With the commutation block implemented in hardware, the Cortex-M3 processor is free to implement higher level control algorithms. Utilizing the SmartFusion intelligent mixed signal FPGA together with a TRINAMIC TMC603A integrated BLDC motor gate driver, customers can implement a complete BLDC motor control with only two components. A demonstration showcasing the latest SmartFusion-based motor control developments from TRINAMIC Motion Control GmbH & Co, KG will be available at ESC Silicon Valley in the Actel booth #930.
Experts from Actel, Power and Control Design and TRINAMIC will be on hand showcasing the demonstrations at ESC Silicon Valley in the Actel booth #930.
About Actel
Actel is the leader in low power FPGAs and mixed signal FPGAs, offering the most comprehensive portfolio of system and power management solutions. Power Matters. Learn more at www.actel.com.
|
Microsemi Hot IP
Related News
- Synopsys Announces Support for Actel's New SmartFusion Intelligent Mixed Signal FPGAs
- Actel Announces Power Management Solution for SmartFusion Intelligent Mixed Signal FPGAs
- Actel Announces Keil's Support of New SmartFusion Intelligent Mixed Signal FPGA Family
- Actel Releases Comprehensive Development Environment and Ecosystem for SmartFusion Intelligent Mixed Signal FPGAs
- Microsemi Announces Expanded Industrial Ecosystem for SmartFusion Intelligent Mixed Signal FPGAs
Breaking News
- Frontgrade Gaisler Unveils GR716B, a New Standard in Space-Grade Microcontrollers
- Blueshift Memory launches BlueFive processor, accelerating computation by up to 50 times and saving up to 65% energy
- Eliyan Ports Industry's Highest Performing PHY to Samsung Foundry SF4X Process Node, Achieving up to 40 Gbps Bandwidth at Unprecedented Power Levels with UCIe-Compliant Chiplet Interconnect Technology
- CXL Fabless Startup Panmnesia Secures Over $60M in Series A Funding, Aiming to Lead the CXL Switch Silicon Chip and CXL IP
- Cadence Unveils Arm-Based System Chiplet
Most Popular
- Cadence Unveils Arm-Based System Chiplet
- CXL Fabless Startup Panmnesia Secures Over $60M in Series A Funding, Aiming to Lead the CXL Switch Silicon Chip and CXL IP
- Esperanto Technologies and NEC Cooperate on Initiative to Advance Next Generation RISC-V Chips and Software Solutions for HPC
- Eliyan Ports Industry's Highest Performing PHY to Samsung Foundry SF4X Process Node, Achieving up to 40 Gbps Bandwidth at Unprecedented Power Levels with UCIe-Compliant Chiplet Interconnect Technology
- Arteris Selected by GigaDevice for Development in Next-Generation Automotive SoC With Enhanced FuSa Standards
E-mail This Article | Printer-Friendly Page |