New-Generation Microprocessor from STMicroelectronics Targets High-Performance Connectivity and Embedded Applications

First member of ST's new advanced symmetrical multiprocessor SPEAr family delivers computing power and customizability for multiple embedded applications

GENEVA, July 29, 2010 -- STMicroelectronics, a world leader in system-on-chip technology, today introduced the industry's first embedded microprocessor that couples two ARM Cortex-A9 cores with a DDR3 (Third-generation double-data rate) memory interface. Manufactured in ST's low-power 55nm HCMOS (high-speed CMOS) process technology, the SPEAr1310 delivers high computing power and customizability for multiple embedded applications together with the high level of cost competitiveness offered by system-on-chip devices.

The new microprocessor combines the unrivalled low power and multi-processing capabilities of the ARM Cortex-A9 processor core with innovative Network-on-Chip (NoC) technology. The dual ARM Cortex-A9 processors support both fully symmetric and asymmetric operations, at speeds of 600MHz/core (industrial worst-case conditions) for 3000 DMIPS equivalent. NoC is a flexible communications architecture that enables multiple different traffic profiles while maximizing data throughput in the most performance- and power-efficient way.

"SPEAr1310 is the first device in the recently announced SPEAr1300 family and others will follow shortly," said Loris Valenti, General Manager of STMicroelectronics' Computer Systems Division. "With its innovative architecture and powerful feature set, SPEAr1310 is at the leading edge of the embedded processor market and enables an unprecedented mix of cost competitiveness, performance and flexibility."

Equipped with an integrated DDR2/DDR3 memory controller and a full set of connectivity peripherals, including, USB, SATA and PCIe (with integrated PHY), in addition to a Giga Ethernet MAC, ST's SPEAr1310 microprocessor targets high-performance embedded-control applications across market segments from communication and computer peripherals to industrial automation.

Cache memory coherency with hardware accelerators and I/O blocks increases throughput and simplifies software development. The Accelerator Coherency Port (ACP), coupled with the device's NoC routing capabilities, addresses the latest application requirements for hardware acceleration and I/O performance. ECC (Error Correction Coding) protection against soft and hard errors on both DRAM and L2 Cache memories dramatically improves the Mean-Time-Between-Failures for enhanced reliability.

Key features of the SPEAr1310 include:

2x Giga/Fast Ethernet ports (for external GMII/RGMII/MII PHY)
3x Fast Ethernet (for external SMII/RMII PHY)
3x PCIe/SATA Gen2 links (with embedded PHY)
1x 32-bit PCI expansion bus (up to 66 MHz)
2x USB 2.0 host ports with integrated PHYs
1x USB2.0 OTG port with integrated PHY
2x CAN 2.0 a/b interfaces
2x TDM/E1 HDLC controllers with 256/32 time slots per frame respectively
2x HDLC controllers for external RS485 PHYs
I2S, UARTs, SPI, I2C ports
HD Display controller with Touchscreen and Overlay windows capabilities
Memory Card I/F
Security HW Accelerator
Secure Boot and Key Storage capabilities
Power saving features

Samples of the SPEAr1310 are now available upon request to lead customers for evaluation and prototyping. Further information on ST's SPEAr family of embedded microprocessor System-on-Chip ICs is available at www.st.com/spear.

About STMicroelectronics

STMicroelectronics is a global leader serving customers across the spectrum of electronics applications with innovative semiconductor solutions. ST aims to be the undisputed leader in multimedia convergence and power applications leveraging its vast array of technologies, design expertise and combination of intellectual property portfolio, strategic partnerships and manufacturing strength. In 2009, the Company's net revenues were $8.51 billion. Further information on ST can be found at www.st.com.