MTI Radiocomp enables 'base station on a chip' with JESD-solution
MTI Radiocomp continues to innovate and drive forward the global evolution of mobile broadband technology with today’s release of the company’s latest IP Core solution.
July 4, 2011 -- MTI Radiocomp continues to innovate and drive forward the global evolution of mobile broadband technology with today’s release of the company’s latest IP Core solution for JESD204A/B-enabled devices. JESD204A/B is a new standard – developed by the JEDEC work group – that vastly improves and simplifies technology needed to efficiently incorporate wireless 4G (LTE and LTE-A) into high performance small base stations, radio heads, and other mobile industry applications.
“The JESD204A/B-standard is well on its way to bring LTE high-performance to small base stations and radio heads in a cost-efficient way. It will allow manufacturers to include beam steering and other sophisticated forms of radio signal processing into a wide variety of new forms of equipment, including femtocells and picocells. The MTI Radiocomp IP Core solution is an important milestone on the road to small cells for LTE, and it’s available today for any ASIC and FPGA silicon technology,” says Senior Product Manager for MTI Radiocomp, Christian Lanzani.
Among the benefits of the JESD204A/B technology are fewer PCB-traces between DSP and AD/DA paths. This means that ‘base station on a chip’ devices with multi-channels can be produced with fewer PCB layers at a lower cost whit a higher reliability. The technology will also increase the signal processing bandwidth of the system.
Many major equipment vendors within the LTE industry are currently promoting solutions that will enable the mass adoption of LTE through small cells and new Cloud RAN architectures. The MTI Radiocomp JESD204A/B-solution is expected to accelerate and support this development over the coming years. The MTI Radiocomp JESD solution complements the company’s existing range of IP Cores for optical interfacing via latest CPRI v.4.2 / ORI and OBSAI v.4.2.
For more about MTI Radiocomp see www.radiocomp.com and to inquire about our JESD, contact MTI Radiocomp at sales@radiocomp.com.
About MTI Radiocomp:
MTI Radiocomp is an industry-leading developer and supplier of remote radio head technology and solutions for next generation mobile broadband networks including LTE, LTE-Advanced, WiMAX, and WCDMA. MTI Radiocomp supplies de-facto standard interfaces for OBSAI and CPRI optical connectivity as well as JESD interfacing technology to leading broadband developers all over the world. MTI Radiocomp is a part of the MTI Group (www.mti.com.tw). For more about MTI Radiocomp see www.radiocomp.com.
|
Related News
- Estimated Shipments of iPhone 14 Devices in 2022 Have Been Lowered to 78.1 Million Units Due to Impact of COVID-19 Lockdown on Foxconn's Base in Zhengzhou, Says TrendForce
- MIPI RFFE (RF Front-End Control Interface) v3.0 Master and Slave Controller IP Cores for ultimate control of your RF Front-end Cellular or Base station SoC's with Low Power Consumption and Reduced Latencies
- Nokia bolsters its base station power efficiency by acquiring Eta Devices
- Xilinx All Programmable Devices Enabling ZTE Pre5G 3D/Massive MIMO Base Station
- Sunrise Micro Devices' Radio Technology Enables Internet Capable Bluetooth Smart IoT Devices
Breaking News
- Jury is out in the Arm vs Qualcomm trial
- Ceva Seeks To Exploit Synergies in Portfolio with Nano NPU
- Synopsys Responds to U.K. Competition and Markets Authority's Phase 1 Announcement Regarding Ansys Acquisition
- Alphawave Semi Scales UCIe™ to 64 Gbps Enabling >20 Tbps/mm Bandwidth Density for Die-to-Die Chiplet Connectivity
- RaiderChip Hardware NPU adds Falcon-3 LLM to its supported AI models
Most Popular
E-mail This Article | Printer-Friendly Page |