NoC Silicon IP for RISC-V based chips supporting the TileLink protocol
EDA Consortium Reports Revenue Increase for Q4 2013
SAN JOSE, Calif., April 1, 2014—The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 5.7 percent for Q4 2013 to $1880.5 million, compared to $1779.1 million in Q4 2012. Sequential EDA revenue for Q4 2013 increased 8.7 percent compared to Q3 2013, while the four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 6.1 percent. The total revenue for calendar 2013 was $6,931.7 million.
"The EDA industry realized record revenues for the fourth quarter 2014 and the calendar year. This was the 16th consecutive quarter showing positive growth in the EDA industry," said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. "Revenues increased in all of the product categories, with double digit increases in PCB & MCM. Geographically, the Asia-Pacific region continued to report double digit growth, with significant growth in the Americas."
Companies that were tracked employed 29,880 professionals in Q4 2013, an increase of 1 percent compared to the 29,578 people employed in Q4 2012, but down 0.3 percent compared to Q3 2013.
The complete MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available via subscription from the EDA Consortium.
Revenue by Product Category
The largest category, Computer Aided Engineering (CAE), generated revenue of $721.7 million in Q4 2013, which represents a 4.1 percent increase compared to Q4 2012. The four-quarters moving average for CAE increased 2.4 percent.
IC Physical Design & Verification revenue increased to $384.4 million in Q4 2013, a 6.6 percent increase compared to Q4 2012. The four-quarters moving average increased 7.1 percent.
Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $190.8 million represents an increase of 14.2 percent compared to Q4 2012. The four-quarters moving average for PCB & MCM increased 6.6 percent.
Semiconductor Intellectual Property (SIP) revenue totaled $486.8 million in Q4 2013, a 4.2 percent increase compared to Q4 2012. The four-quarters moving average increased 9.6 percent.
Services revenue was $96.8 million in Q4 2013, an increase of 6.1 percent compared to Q4 2012. The four-quarters moving average increased 10.2 percent.
Revenue by Region
The Americas, EDAfs largest region, purchased $822.1 million of EDA products and services in Q4 2013, an increase of 7.2 percent compared to Q4 2012. The four-quarters moving average for the Americas increased 5.5 percent.
Revenue in Europe, the Middle East, and Africa (EMEA) was down 0.7 percent in Q4 2013 compared to Q4 2012 on revenues of $328.9 million. The EMEA four-quarters moving average increased 4.2 percent.
Fourth quarter 2013 revenue from Japan decreased 0.9 percent to $256.9 million compared to Q4 2012. The four-quarters moving average for Japan decreased 5.4 percent.
The Asia/Pacific (APAC) region revenue increased to $472.7 million in Q4 2013, an increase of 12.1 percent compared to the fourth quarter of 2012. The four-quarters moving average increased 16.0 percent.
About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.
About the EDA Consortium
The EDA Consortium is the international association of companies that provide design tools and services that enable engineers to create the worldfs electronic products used for communications, computer, space technology, medical, automotive, industrial equipment, and consumer electronics markets among others. For more information about the EDA Consortium, visit www.edac.org, or to subscribe to the Market Statistics Service, call 408-287-3322 or email mss13@edac.org.
|
Related News
Breaking News
- HPC customer engages Sondrel for high end chip design
- Ubitium Debuts First Universal RISC-V Processor to Enable AI at No Additional Cost, as It Raises $3.7M
- TSMC drives A16, 3D process technology
- Frontgrade Gaisler Unveils GR716B, a New Standard in Space-Grade Microcontrollers
- Blueshift Memory launches BlueFive processor, accelerating computation by up to 50 times and saving up to 65% energy
Most Popular
- Cadence Unveils Arm-Based System Chiplet
- Eliyan Ports Industry's Highest Performing PHY to Samsung Foundry SF4X Process Node, Achieving up to 40 Gbps Bandwidth at Unprecedented Power Levels with UCIe-Compliant Chiplet Interconnect Technology
- TSMC drives A16, 3D process technology
- CXL Fabless Startup Panmnesia Secures Over $60M in Series A Funding, Aiming to Lead the CXL Switch Silicon Chip and CXL IP
- Blueshift Memory launches BlueFive processor, accelerating computation by up to 50 times and saving up to 65% energy
E-mail This Article | Printer-Friendly Page |