North American Semiconductor Equipment Industry Posts October 2014 Book-to-Bill Ratio of 0.93
SAN JOSE, Calif. — November 20, 2014 — North America-based manufacturers of semiconductor equipment posted $1.10 billion in orders worldwide in October 2014 (three-month average basis) and a book-to-bill ratio of 0.93, according to the October EMDS Book-to-Bill Report published today by SEMI. A book-to-bill of 0.93 means that $93 worth of orders were received for every $100 of product billed for the month.
The three-month average of worldwide bookings in October 2014 was $1.10 billion. The bookings figure is 7.0 percent lower than the final September 2014 level of $1.19 billion, and is 1.9 percent lower than the October 2013 order level of $1.12 billion.
The three-month average of worldwide billings in October 2014 was $1.18 billion. The billings figure is 5.8 percent lower than the final September 2014 level of $1.26 billion, and is 10.6 percent higher than the October 2013 billings level of $1.07 billion.
"While the global semiconductor equipment industry will see strong double-digit growth this year and is slated for further growth in 2015, order activity posted by North American suppliers has moderated, resulting in a book-to-bill ratio below parity for two consecutive months," said SEMI president and CEO Denny McGuirk.
The SEMI book-to-bill is a ratio of three-month moving averages of worldwide bookings and billings for North American-based semiconductor equipment manufacturers. Billings and bookings figures are in millions of U.S. dollars.
| Billings | Bookings | Book-to-Bill |
May 2014 | $1,407.8 | $1,407.0 | 1.00 |
June 2014 | $1,327.5 | $1,455.0 | 1.10 |
July 2014 | $1,319.1 | $1,417.1 | 1.07 |
August 2014 | $1,293.4 | $1,346.1 | 1.04 |
September 2014 (final) | $1,256.5 | $1,186.2 | 0.94 |
October 2014 (prelim) | $1,184.0 | $1,102.9 | 0.93 |
Source: SEMI, November 2014
The data contained in this release were compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.
The data are contained in a monthly Book-to-Bill Report published by SEMI. The report tracks billings and bookings worldwide of North American-headquartered manufacturers of equipment used to manufacture semiconductor devices, not billings and bookings of the chips themselves. The Book-to-Bill report is one of three reports included with the SEMI Equipment Market Data Subscription (EMDS).
SEMI is the global industry association serving the nano- and micro-electronic manufacturing supply chains. Our 1,900 member companies are the engine of the future, enabling smarter, faster and more economical products that improve our lives. Since 1970, SEMI has been committed to helping members grow more profitably, create new markets and meet common industry challenges. SEMI maintains offices in Bangalore, Beijing, Berlin, Brussels, Grenoble, Hsinchu, Moscow, San Jose, Seoul, Shanghai, Singapore, Tokyo, and Washington, D.C. For more information, visit www.semi.org.
|
Related News
- North American Semiconductor Equipment Industry Posts October 2016 Book-to-Bill Ratio of 0.91
- North American Semiconductor Equipment Industry Posts October 2015 Book-to-Bill Ratio of 0.98
- North American Semiconductor Equipment Industry Posts November 2014 Book-to-Bill Ratio of 1.02
- North American Semiconductor Equipment Industry Posts September 2014 Book-to-Bill Ratio of 0.94
- North American Semiconductor Equipment Industry Posts August 2014 Book-to-Bill Ratio of 1.04
Breaking News
- Jury is out in the Arm vs Qualcomm trial
- Ceva Seeks To Exploit Synergies in Portfolio with Nano NPU
- Synopsys Responds to U.K. Competition and Markets Authority's Phase 1 Announcement Regarding Ansys Acquisition
- Alphawave Semi Scales UCIe™ to 64 Gbps Enabling >20 Tbps/mm Bandwidth Density for Die-to-Die Chiplet Connectivity
- RaiderChip Hardware NPU adds Falcon-3 LLM to its supported AI models
Most Popular
E-mail This Article | Printer-Friendly Page |