GNSS (GPS, Galileo, GLONASS, Beidou3, QZSS, SBAS) Ultra-low power RF Receiver IP
Newracom and Aviacomm Announce Availability of High-performance 802.11ah Reference Design for IoT Applications using Sub-1GHz ISM Frequency Bands
Collaboration delivers proven power-efficient, compact IEEE 802.11ah standard-based design for controlling IoT devices using global sub-1GHz ISM bands
Sunnyvale and Irvine California -- September 7, 2016 -- Aviacomm Inc, a leading developer of integrated RF (radio frequency) circuits and Newracom Inc., a wireless solutions innovator, have combined efforts to develop a high-performance IEEE 802.11ah modem for M2M and IoT applications.
The IEEE 802.11ah standard (also called “HaLow”) extends the utility of the Wi-Fi standard used for computer networking by adding features specifically designed to meet the unique requirements of Machine to Machine and Internet of Things applications.
The HaLow standard uses lower frequency radio waves (from 755MHz to 928MHz globally) which propagate better over distance and are much better at traveling through obstacles like doors and walls. IoT networks that are deployed using 802.11ah standard devices achieve considerably longer operating range than those based on higher frequencies required by other standards.
The new reference design is based on Newracom’s low-power 802.11ah baseband processor, the NRC7271, and Aviacomm's advanced broadband configurable RFIC, the ARF3010. This modem design delivers to market a hardware solution with advanced software features that support all global sub-1GHz ISM bands for M2M/IoT applications. This will enable M2M/IoT vendors to deploy advanced small-size, low-power networks for use in a wide variety of indoor and outdoor customized control applications.
“We have worked closely with our customers to develop a reference design that will meet all of their needs – delivering a complete high-performance solution that eases integration of the communication link into the IoT platform,” said Sok Kyu Lee, NEWRACOM’s chief executive officer. “Aviacomm has been a key partner in this effort, providing an RF transceiver that tunes to all sub-1GHz global ISM bands with excellent performance.”
Technical Highlights
Reference designs are available for both the AP (access point) and the client terminal. The AP supports up to 8,000 terminals with bit rates from 150kbps up to 15Mbps using 1, 2, or 4MHz channel bandwidths. The client terminal supports bit rates from 150kBps up to 1.950Mbps using 1 or 2MHz channels. These reference designs are optimized for cost and performance and are developed to comply with the latest IEEE 802.11ah standards.
“We believe the M2M market is ready for a complete 802.11ah solution and a single design that is enabled by our ARF technology,” stated Chenyu Chang, CEO of Aviacomm. “Today M2M vendors are forced to select solutions from a bewildering array of standard and non-standard options, but the Wi-Fi Alliance offers a familiar and trust-worthy approach with the availability of the new HaLow standard.”
Availability
The new reference design kit, based on the Newracom NRC7271 802.11ah baseband IC and the Aviacomm ARF3010 RFIC will be available from Newracom this fall.
About Aviacomm
Aviacomm (www.aviacomm.com ) offers low-power, high performance, frequency agile RF front-end solutions that address a variety of markets and applications. The ARF3010 CMOS RF transceiver covers from 50MHz to 2.8GHz, with channel sizes from 0.5MHz to 40MHz, enabling this single RFIC solution to support multiple wireless communication system requirements. For more information on Aviacomm, visit our website at www.aviacomm.com or contact us at sales@aviacomm.com.
About Newracom
NEWRACOM, Inc. is a technology-intensive global startup in wireless technologies for enabling everything to communicate and be connected. The company had its origin within ETRI (Electronics and Telecommunications Research Institute), the largest public ICT research institute in Korea. For more information visit NEWRACOM online at http://www.newracom.com
|
Related News
- GLOBALFOUNDRIES Offers New Low-Power 28nm Solution for High-Performance Mobile and IoT Applications
- GDA Technologies Announces Availability of Advanced Mezzanine Reference Platform for Freescale's High-Performance MPC8548E PowerQUICC(TM) III Processor
- Availability of New 16-bit 5MSps SAR ADC in 40nm Node Sets New Standards for High-Performance Data Conversion
- Fabless semiconductor startup Mindgrove launches India's first indigenously designed commercial high-performance MCU chip
- Synopsys and Samsung Foundry Collaboration Delivers Optimized Reference Methodology for High-Performance Compute Designs
Breaking News
- intoPIX Powers Ikegami's New IPX-100 with JPEG XS for Seamless & Low-Latency IP Production
- Tower Semiconductor and Alcyon Photonics Announce Collaboration to Accelerate Integrated Photonics Innovation
- Qualcomm initiates global anti-trust complaint about Arm
- EnSilica Agrees $18m 7 Year Design and Supply ASIC Contract
- SiliconIntervention Announces Availability of Silicon Based Fractal-D Audio Amplifier Evaluation Board
Most Popular
- Qualcomm initiates global anti-trust complaint about Arm
- Siemens acquires Altair to create most complete AI-powered portfolio of industrial software
- Alphawave Semi Reveals Suite of Optoelectronics Silicon Products addressing Hyperscaler Datacenter and AI Interconnect Market
- EnSilica Agrees $18m 7 Year Design and Supply ASIC Contract
- Rapidus Announces Strategic Partnership with Quest Global to Enable Advanced 2nm Solutions for the AI Chip Era
![]() |
E-mail This Article | ![]() |
![]() |
Printer-Friendly Page |