USB2.0 OTG PHY supporting UTMI+ level 3 interface - 28HK/55LL
Agnisys to Present Functional Safety, Machine Learning, IoT Solutions, and More at the Design Automation Conference in San Francisco
BOSTON, MA, May 23, 2018 - Agnisys will announce innovative solutions for complex design and verification problems in system development at the Design Automation Conference (DAC) in San Francisco, CA.
“Agnisys is committed to offering electronic engineers an edge with our state-of-the-art solutions,” said Anupam Bakshi, Agnisys CEO. “At DAC we are excited to introduce breakthrough innovations in Functional Safety, Machine Learning, IoT, and more.”
Visitors to Agnisys’ booth at DAC will also have the opportunity to take a quiz for a chance to win a da Vinci Wireless 3D Printer.
Design Automation Conference (DAC) 2018 Booth #1345
Technical Sessions and Demos
June 25-27, 2018 from 10:00am to 6:00pm
Role of Functional Safety in Automotive Product Development
Functional Safety has seen rapid transformation in the past few years. Addressing complex issues such as liability, fault detection, IP Verification, Traceability Requirements, Cyclic Redundancy Check (CRC) and Parity, and more in a high-volume, cost-sensitive industry is no small task.
Learn how Agnisys will deliver a new edge to functional security by providing an end-to-end functional safety solution that reduces the overall automotive compliance effort. Agnisys IDesignSpec™ has been enhanced to cater to these growing needs of functional safety in the automotive industry with new features that include aspects of functional safety through all phases of the system development process.
Machine Learning for the Next Generation
Machine Learning/Deep Learning applications require Hyper Parameters. While in software these parameters are easy to control manipulate, however when Machine Learning applications are implemented in hardware, these hyper parameters are typically converted into register settings addressable by a register bus. These register-based hyper parameters can run into thousands if not tens of thousands.
As experts in the field of register and sequence specification, learn how Agnisys is making headway with home-grown machine-learning algorithms — and applying it to multi-platform product IDS NextGen™ to help users create SoC specification at an enterprise level.
Interplay of IoT in Electronic Design
IoTs have placed a greater demand on the semiconductor industry to deliver embedded systems at a faster pace and with high quality. Due to time to market pressures, IoTs have also reduced the time gap between verification and validation.
Learn how Agnisys has reduced the turnaround time from specification to realization of hardware and software targeting FPGAs and ASICs using ISequenceSpec™.
We invite you to visit www.agnisys.com/dac2018 or contact us to learn more.
About the Design Automation Conference (DAC)
The Design Automation Conference (DAC) is recognized as the premier event for the design of electronic circuits and systems, and for Electronic Design Automation (EDA) and silicon solutions. The conference is sponsored by the Association for Computing Machinery (ACM), the Electronic System Design Alliance (ESDA), and the Institute of Electrical and Electronics Engineers (IEEE), and is supported by ACM's Special Interest Group on Design. www.dac.com
About Agnisys
Agnisys Inc. is a leading supplier of Electronic Design Automation (EDA) software for solving complex design and verification problems for system development. Agnisys products provide a common specification-driven development flow to describe registers and sequences for system-on-chip (SoC) and intellectual property (IP) enabling faster design, verification, firmware, and validation. Based on patented technology and intuitive user interfaces, Agnisys offers solutions to increase productivity and efficiency while eliminating system design and verification errors. Founded in 2007, Agnisys is based in Boston, Massachusetts, with Research and Development Centers in the US and India. www.agnisys.com
|
Related News
- True Circuits Attends Design Automation Conference, Celebrates 20 Years of Timing Excellence!
- Moortec will be exhibiting their In-Chip Monitoring Subsystem IP at DAC 2018 in San Francisco
- Sankalp Semiconductor to Exhibit at Design Automation Conference - 2018
- OmniPhy to Present "Designing IPs For Automotive Applications," at DAC 2015 in San Francisco
- M31 Debuts at the North American Design Automation Conference, Showcasing IP Solutions for Advanced Processes
Breaking News
- Logic Design Solutions launches Gen4 NVMe host IP
- ULYSS1, Microcontroller (MCU) for Automotive market, designed by Cortus is available
- M31 is partnering with Taiwan Cooperative Bank to launch an Employee Stock Ownership Trust to strengthen talent retention
- Sondrel announces CEO transition to lead next phase of growth
- JEDEC Publishes LPDDR5 CAMM2 Connector Performance Standard
Most Popular
- Arm's power play will backfire
- Alphawave Semi Selected for AI Innovation Research Grant from UK Government's Advanced Research + Invention Agency
- Secure-IC obtains the first worldwide CAVP Certification of Post-Quantum Cryptography algorithms, tested by SERMA Safety & Security
- Weebit Nano continuing to make progress with potential customers and qualifying its technology Moving closer to finalisation of licensing agreements Q1 FY25 Quarterly Activities Report
- PUFsecurity Collaborate with Arm on PSA Certified RoT Component Level 3 Certification for its Crypto Coprocessor to Provide Robust Security Subsystem Essential for the AIoT era
E-mail This Article | Printer-Friendly Page |