Xilinx Delivers Breakthrough Design Tool For High Performance Signal Processing With New System Generator For DSP v6.3I
by combining the benefits of C-based and HDL flows within a single solution
GSPx CONFERENCE, SANTA CLARA, Calif., September 28, 2004 Xilinx, Inc. (NASDAQ: XLNX) today announced it's next generation System Generator for DSP v6.3i development tool with full support for the company's flagship Virtex-4 Platform FPGAs. Furthering Xilinx's XtremeDSP initiative, System Generator v6.3i provides enhancements that make it easier for designers to build high performance digital signal processing (DSP) systems using industry-standard DSP design methodologies.
"With each new generation of the System Generator tool, we've significantly enhanced design performance and productivity," said Omid Tahernia, vice president and general manager of the DSP Division at Xilinx. "The new tool, combined with the revolutionary DSP capability of the recently introduced Virtex-4 Platform FPGA family, takes the Xilinx XtremeDSP initiative to the next level and will drive FPGAs further into high performance DSP applications."
The System Generator v6.3i tool allows designers to take full advantage of the high performance features within the Virtex-4 Platform FPGA and the XtremeDSP Slice. Filters can be developed with speeds up to 500MHz at less than 1/10th the area than previous generation Xilinx FPGAs and at less than 1/7th the power in the signal processing chain. The tool is also bridging the DSP tools gap by providing a complete, front-to-back design flow that blend the benefits of C-based and HDL design methodology within a single solution. System Generator v6.3i combines the benefits of C-based tools such as edit, compile, debug and quick design iterations with the benefits of HDL tools to create compact, high performance and highly parallel architectures. This allows designers with little or no experience in HDL design techniques to work at a very high level and go from first thought to verified silicon within a matter of days, rather than weeks.
A unique hardware in the loop co-simulation feature allows designers to greatly accelerate simulation while simultaneously verifying the design in hardware. System Generator v 6.3i includes a new DMA burst mode feature that increases data flow between the tool and FPGA by over 100 times - allowing designers to run multiple iterations in the time it took to run a single design in previous generation tools. The tool is also tightly coupled with the company's recently introduced Embedded Development Kit (EDK) v.6.3i, enabling designers to target Xilinx hard and soft processors and external processors for control path development.
"The Xilinx Virtex-4 FPGA and System Generator for DSP tool are an extremely powerful combination for designers of high-performance signal processing systems," said Ken Karnofsky, marketing director for Signal Processing and Communications at The MathWorks. "System Generator's high-bandwidth, DMA burst mode capability improves
simulation time by over two orders of magnitude than previous generation tools."
System Generator for DSP Solution
System Generator automates the design, debug and deployment of FPGA-based processing systems with push-button performance. Systems architects, DSP engineers, and hardware designers can model complete DSP systems in an integrated system-level design environment. In addition to the industry's richest simulation libraries for high level modeling and automatic validation code generation, System Generator provides a high-speed HDL co-simulation interface to the ModelSim simulator from Model Technologies, Inc. Other unique capabilities include MATLAB m-code compilation, fast system-level resource estimation, and high-speed hardware co-simulation interfaces, both a generic JTAG interface and PCI-based co-simulation for FPGA hardware platforms.
Comprehensive DSP Cores Library
In related news, Xilinx today announced the immediate availability of a DSP core library for use with its Virtex-4 Platform FPGA family. Through high levels of parameterization, the core library leverages unique Xilinx silicon capabilities like SRL16s and the XtremeDSP Slice to yield the fastest and smallest implementations in the FPGA industry. The new cores include a DOCSIS ITU-T J.83 Annex A/C Modulator core for cable modem head-end equipment and an enhanced Digital up-Converter (DUC) core for wireless infrastructure. The DUC core can be used in the upstream path along side a DSP processor. The cores enable customers to develop faster, lower-cost designs for multi-carrier, spread spectrum and narrow-band systems.
Pricing & Availability
The System Generator for DSP v6.3i tool is used with the Integrated Software Environment (ISE) 6.3i FPGA design suite from Xilinx. The tool is priced at $995 for a limited time - half the price of the previous generation tool. The Annex A/C Modulator and DUC cores are immediately available and are priced at $2000 and free of charge respectively. For more information about System Generator for DSP 6.3i and Xilinx's XtremeDSP initiative, visit http://www.xilinx.com/dsp. For complete information about the Xilinx DSP core library, visit http://www.xilinx.com/ipcentral.
Xilinx XtremeDSP Initiative
The XtremeDSP initiative represents a major commitment by Xilinx to bring the benefits of FPGAs to high-performance DSP solutions. The company's XtremeDSP solution includes:
- First DSP domain-optimized Platform FPGAs with next-generation Virtex-4 family
- First Platform FPGAs with dedicated DSP features in Virtex -II and Virtex-II Pro FPGAs
- First FPGAs supporting DSP MAC functions in Virtex family
- First to market with proven DSP design methodologies through strategic collaboration with The MathWorks
- Extensive library of proven DSP IP cores and advanced development boards to accelerate the design cycle and maximize performance.
- Wealth of design resources including design services, dedicated field specialists, and DSP education classes.
Xilinx is the worldwide leader in complete programmable logic solutions. For more information, visit www.xilinx.com.
|
Xilinx, Inc. Hot IP
Related News
- New Xilinx System Generator For DSP V2.3 Tool Enables Lowest Cost, Highest Performance FPGA Designs
- Xilinx Ships New Release Of System Generator For DSP Development Tool With Full Support For Latest MatLab & Simulink Software
- Xilinx Spartan-3 Devices Enable High Performance DSP Functions at Breakthrough Low Cost Price Points
- Synopsys Delivers Breakthrough Performance with New ZeBu Empower Emulation System for Hardware-Software Power Verification
- Cadence Launches Tensilica Fusion G3 DSP Featuring Exceptional Out-of-the-Box Performance for Compute-Intensive Signal Processing Applications
Breaking News
- Frontgrade Gaisler Unveils GR716B, a New Standard in Space-Grade Microcontrollers
- Blueshift Memory launches BlueFive processor, accelerating computation by up to 50 times and saving up to 65% energy
- Eliyan Ports Industry's Highest Performing PHY to Samsung Foundry SF4X Process Node, Achieving up to 40 Gbps Bandwidth at Unprecedented Power Levels with UCIe-Compliant Chiplet Interconnect Technology
- CXL Fabless Startup Panmnesia Secures Over $60M in Series A Funding, Aiming to Lead the CXL Switch Silicon Chip and CXL IP
- Cadence Unveils Arm-Based System Chiplet
Most Popular
- Cadence Unveils Arm-Based System Chiplet
- CXL Fabless Startup Panmnesia Secures Over $60M in Series A Funding, Aiming to Lead the CXL Switch Silicon Chip and CXL IP
- Esperanto Technologies and NEC Cooperate on Initiative to Advance Next Generation RISC-V Chips and Software Solutions for HPC
- Eliyan Ports Industry's Highest Performing PHY to Samsung Foundry SF4X Process Node, Achieving up to 40 Gbps Bandwidth at Unprecedented Power Levels with UCIe-Compliant Chiplet Interconnect Technology
- Arteris Selected by GigaDevice for Development in Next-Generation Automotive SoC With Enhanced FuSa Standards
E-mail This Article | Printer-Friendly Page |