English
You are here:
10-bit 1-channel 1 to 100 MSPS current DAC
The 10-bit dual high-speed DAC is based on current steering architecture, which provides high-speed conversion rate and good dynamic performance. DAC consists of four principal blocks: adjustable bias, control logic, current source array and current output switches. Device has a feature of adjusting output current, output cascade transistors bias voltage, and entering sleep mode, turning device off. DAC requires 1 V digital supply, 1.8 V digital and analog supply, and digital and analog ground to work properly. Pins dac_adj[4:0] adjust DAC output current and pins vbias_cm0_adj[2:0] adjust output cascades transistors bias voltage.
View 10-bit 1-channel 1 to 100 MSPS current DAC full description to...
- see the entire 10-bit 1-channel 1 to 100 MSPS current DAC datasheet
- get in contact with 10-bit 1-channel 1 to 100 MSPS current DAC Supplier
10-bit IP
- 4K/ 8K LCEVC Video Encoder
- 10-bit 2MS/s SAR ADC
- 10-Bit 64MHz 1.2V 1.9mW delta-sigma ADC, CMOS 130nm
- 2-cluster Series6XT 3D/2D/Compute GPU including OpenGL ES 3.0, DX10_0 Feature Level and OpenCL Support , 10-bit YUV, YUV framebuffer
- 2-cluster Power Consumption & Performance Efficiency Enhanced Series6XT 3D/2D/Compute GPU including OpenGL ES 3.0, DX10_0 Feature Level and OpenCL Support , 10-bit YUV, YUV framebuffer, ASTC
- 10-Bit 100MS/s 1.8V 66mW ADC, CMOS 0.18µm