English
You are here:
12 bit digital output CMOS temperature sensor in 28nm
TSENU28HPCP is an IP for temperature sensing of the silicon chip die. Each voltage sensor node is connected with the central controller with a single wire digital signal for communicating the sensor data in real time. Dedicated enable signal is provided with each node to enable or disable the operation for power management. IP has parallel communication interface with command and response protocol using two 12bit digital I/O ports. Alert signals can also be configured to alert low and high threshold crossing using parallel communication port.
Sensor has trimming options to calibrate the accuracy of temperature probes.
Design is based on ultra-low power delta sigma modulator with excellent noise performance and high accuracy eliminating all inherent offset and gain errors while implementing the compensation inbuilt in the loop
Sensor has trimming options to calibrate the accuracy of temperature probes.
Design is based on ultra-low power delta sigma modulator with excellent noise performance and high accuracy eliminating all inherent offset and gain errors while implementing the compensation inbuilt in the loop
View 12 bit digital output CMOS temperature sensor in 28nm full description to...
- see the entire 12 bit digital output CMOS temperature sensor in 28nm datasheet
- get in contact with 12 bit digital output CMOS temperature sensor in 28nm Supplier
Thermal sensor IP
- Temperature Sensor with Digital Output (High accuracy thermal sensing for reliability and optimisation), TSMC N7
- Distributed Thermal Sensor (DTS) Deep NWELL, TSMC N5
- Distributed Thermal Sensor (DTS) Non-Deep NWELL, TSMC N5
- Temperature Sensor with Digital Output (High accuracy thermal sensing for reliability and optimisation), TSMC N6
- Distributed Thermal Sensor (DTS) Non Deep NWELL TSMC N6
- Temperature Sensor with Digital Output (High accuracy thermal sensing for reliability and optimisation), TSMC 12FFC