English
Multi Protocol Switch IP Core for Safe and Secure Ethernet Network
You are here:
1V Low – Dropout (LDO) Voltage Regulator
The WEA3610LD45G is a voltage feedback amplifier (series – shunt) which active part is comprised of a telescopic cascode amplifier stage, followed by a PMOS pass – device which operates in saturation as a common source stage. The Current Limit Protection circuit detects an output current bigger than the prescribed value and the Power Good circuit detects when the output voltage of the LDO is within a certain range, in which the output is considered valid. Results validate a 1V output voltage from a 1.8 V to 3.6 V input voltage with a current dissipation of 3uA.
View 1V Low – Dropout (LDO) Voltage Regulator full description to...
- see the entire 1V Low – Dropout (LDO) Voltage Regulator datasheet
- get in contact with 1V Low – Dropout (LDO) Voltage Regulator Supplier
Block Diagram of the 1V Low – Dropout (LDO) Voltage Regulator
Voltage Regulator IP
- Low Noise, On-Die, Localized Voltage Regulation
- Scalable, On-Die Voltage Regulation for High Current Applications
- LDO Voltage Regulator, 30 mA, Adjustable 0.45 V to 0.9 V Output
- LDO Voltage Regulator, 250 mA, Adjustable 0.45 V to 0.9 V Output
- Linear Low-Dropout Regulator (Output Voltage 0.9V)
- Linear Low-Dropout Regulator (Output Voltage 0.6V)