English
You are here:
2 mA LDO voltage regulator (output voltage 1.2 V)
The voltage regulator consists of a differential amplifier, pass transistor and resistor's divider. Differential amplifier compares reference voltage with voltage from a feedback divider and adjusts the impedance of a PMOS transistor for stabilization of output voltage at a set level. The output voltage adjustment is defined by the trimming code trim<5:0>. The block has low supply current and allows high current load.
The LDO can operate in two modes: “Normal” and “Economy”. “Economy” mode is introduced to save battery power. Although the mode may handle full current load, it has slower reactions on load current change. “Normal” mode is a default LDO mode with minimum response time on load change.
The block is designed on Global Foundries CMOS 55 nm technology.
The LDO can operate in two modes: “Normal” and “Economy”. “Economy” mode is introduced to save battery power. Although the mode may handle full current load, it has slower reactions on load current change. “Normal” mode is a default LDO mode with minimum response time on load change.
The block is designed on Global Foundries CMOS 55 nm technology.
View 2 mA LDO voltage regulator (output voltage 1.2 V) full description to...
- see the entire 2 mA LDO voltage regulator (output voltage 1.2 V) datasheet
- get in contact with 2 mA LDO voltage regulator (output voltage 1.2 V) Supplier
LDO IP
- LDO Voltage Regulator, 30 mA, Adjustable 0.45 V to 0.9 V Output
- LDO Voltage Regulator, 250 mA, Adjustable 0.45 V to 0.9 V Output
- Analog Front End: 16x 12-bit 200 MSPS ADCs, 14x Voltage DACs, 4x 250 MSPS DACs, 4x TVM, LDO
- Analog Front End: 2x 12-bit 4 GSPS IQ ADCs, 2x 12-bit 8GSPS IQ DACs, bandgap, temp sensor, PLL, 4 x LDO
- LDO Linear Voltage Regulator
- Ultra-low quiescent LDO voltage regulator in TSMC 22ULL