English
You are here:
3.3 - 4.2V to 0 - minus 200V step-down DC/DC converter
180XFAB_DCDC_04 is a DC/DC step-down voltage converter that generates -200V output voltage from 3.3V to 4.2V. The DC/DC consists of OTA and transistor-capacitive voltage multiplier cells. The block is designed for no load at the output at 41uA current consumption for 3.7V input voltage and -155V output voltage a. Shutdown mode is activated by setting en to “0” and turns off the DC/DC converter. Current consumption decrease with output voltage increasing. It will take 20ms to charge external 1nF capacitor from 0 to -200V.
View 3.3 - 4.2V to 0 - minus 200V step-down DC/DC converter full description to...
- see the entire 3.3 - 4.2V to 0 - minus 200V step-down DC/DC converter datasheet
- get in contact with 3.3 - 4.2V to 0 - minus 200V step-down DC/DC converter Supplier
DCDC IP
- Nano power DC-DC converter in SMIC 40EF with ultra-low quiescent current and high efficiency at light load
- Nano power DC-DC converter in TSMC 22ULL with ultra-low quiescent current and high efficiency at light load
- Nano power DC-DC converter in TSMC 40uLP with ultra-low quiescent current and high efficiency at light load
- TSMC 40nm LP combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode
- High efficiency and Low BoM DC-DC designed in GobalFoundries 22FDX
- GF 22FDX combo voltage regulator combining a high efficiency DC-DC for operation in normal mode and an ultra-low quiescent uLDO to supply AON domain during sleep mode