English
You are here:
32G Multi-SerDes PHY
The Innosilicon 32G SERDES PHY is a highly configurable PHY capable of supporting speeds up to 32Gbps within a single lane. For this particular datasheet, the PHY has been configured to support HMC-32G-VSR specifically, but the PHY itself can be configured to support a wide range of HS SERDES protocols through changes to the PCS layer and register settings.
The PHY is physically configured in order to support multi-lane solutions. There is a common block with Tx PLL, reference clock input, bandgap, bias circuitry and termination calibration. This common block can then support up to 4 lanes of Tx/Rx.
The PHY is physically configured in order to support multi-lane solutions. There is a common block with Tx PLL, reference clock input, bandgap, bias circuitry and termination calibration. This common block can then support up to 4 lanes of Tx/Rx.
View 32G Multi-SerDes PHY full description to...
- see the entire 32G Multi-SerDes PHY datasheet
- get in contact with 32G Multi-SerDes PHY Supplier
32G SerDes IP
- 32G Multi Rate SerDes PHY - GlobalFoundries 22FDX
- 32G Multi Rate Long Reach SerDes PHY - GlobalFoundries 12LP and 12LPP
- 32G Multi Rate Very Short Reach SerDes PHY - GlobalFoundries 12LP and 12LPP
- 32G LR Multi-Protocol SerDes (MPS) PHY - GLOBALFOUNDRIES 22nm
- 64G/56G SerDes
- 32G Multi-SerDes For PCIe5.0/USB3.x PHY