The eMMC 5.0 / SD3.0 Host Controller IP (3MCR) is a highly integrated host controller IP solution that supports three key memory and I/O technologies: 1) SD, 2) SDIO and 3) eMMC memory formats. ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

The eMMC 5.0 / SD3.0 Host Controller IP (3MCR) is a highly integrated host controller IP solution that supports three key memory and I/O technologies: SD, SDIO and eMMC memory formats. This ...

The SDIO 3.0 Device Controller is fully compliant with the SD Specification Part E1 SDIO 3.0. The SDIO 3.0 Device IP is used to implement high-performance SDIO cards that connect to a Host processor ...

The SD / SDIO 3.0 Combo Device Controller IP Core is compliant with the latest SD, SDIO standard and supports asynchronous interrupts to improve card performance. The SD / SDIO 3.0 Combo ...

The SD4.0/SDIO4.0/eMMC5.0 Host Controller IP is a highly integrated host controller IP solution that supports three key memory card I/O technologies: - SD4.0 - SDIO4.0 - eMMC5.0 ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

INNOSILICON eMMC/SD/SDIO Combo IP solution consists of a host controller and PHY and supports eMMC/SD/SDIO devices. When connecting the eMMC device, the IP supports HS400, HS200, High-Speed ...

A complete, easy to integrate and cost-effective IP core featuring SD/SDIO/MMC Host Controller Interface, for SoC/PDA applications that connect to SD/MMC memory cards and SDIO/combo devices ...

Arasan provides a HS400 compatible PHY that customers can integrate with the HS400 I/O PADs. It is designed to optimize I/O performance with a core voltage of 1.1V and I/O voltage of 1.8/3.3V ...

SD host controller wih ahb interface, compliant with the SD Host Controller Standard Specification Version 3.00.

DLL-based cell that generates 32 phase delay for SDIO; Frequency range: 52MHz~208MHz; UMC 28nm HPC Logic Process

M31’s I/O Libraries now include integrated ESD cell designs for General I/O, eMMC I/Os, SDIOs, and ONFI I/O. We provide standard JEDEC ESD level and customized high-level ESD I/O across various ...

SD (Secureity Digital) and eMMC (embedded MultiMedia Card) I/Os are non-volatile memory interface technologiesy with high bandwidth capabilities, which is particularlymainly developed for flash ...

SDIO DEVICE interface provides full support for the SDIO DEVICE synchronous serial interface, compatible with SD specification part E1 SDIO 4.10. Through its compatibility, it provides a simple ...

SDIO HOST interface provides full support for the SDIO HOST CONTROLLER synchronous serial interface, compatible with SDIO version 4.10 specification. Through its compatibility, it provides ...

A compact low power and scalable IP core which provides a simple, firmware-friendly cost-effective Physical Link interface for memory, i/o and combo devices, such as SD-based memory cards, Mini ...

The SDIO/SD Memory/MMC Host Controller IP Core is a host controller for SD memory card, SDIO and MMC interface. The core connects the host CPU of the system to the SD card socket. SD memory ...

The SDIO/SD Memory/MMC Slave Controller IP Core supports both 1 and 4 bit SD interface (up to 8 bits in optional MMC support) and SPI mode. Data rate of up to 25Mbyte/sec (200Mbs) can be realized ...

The iWave SD v2.0 Controller interfaces a SD/MMC/SDIO card to any processor with a generic interface. The interface towards the SD card is realized by the SD protocol implemented in the controller. ...

Compatible with SD/SDIO specification 3.0 with 1 and 4 bit data transfer. ; Option to support MMC 4.2 with 8-bit data width. ; Support SD, SPI and optional MMC bus protocol. ; Support standard ...

iW-SD Controller interfaces SD / MMC / SDIO card to any processor with a generic interface. The interface towards the SD card is realized by the SD protocol implemented in the controller. .

SDIO Slave controller facilitates the design of SDIO cards and reduces the development time. By using this IP core, customers no longer need to spend time on handling the SD bus protocol since ...

iW-SDIO to UART bridge is a IP core which converts SDIO slave to UART bus interface. .

SD/SDIO Combo Device IP core is an SD memory controller and an SDIO controller with an AHB interface. Combining with the optional our SD/SDIO Combo Device IP provides an integrated SD memory ...

SD4.1 UHS-II IP utilizes distinctive SerDes technology to attain a speed of 312MB/s for UHS-II while maintaining low power consumption. This PHY IP is versatile, suitable for use on both the ...

Dolphin Technology delivers custom, synthesizable IP to support specific design requirements. The DTI EMMC controller provides the logic to integrate a Host and PHY controller supporting embedded ...

Compliant with the following specifications: - Part 1 Physical Layer Specification Version 5.0 - Part 1 UHS-II Addendum Version 1.02 - Part A2 SD Host Controller Specification Version 4.20

The SD 3.0/eMMC 4.41 Host Controller IP Core is for SD and SDIO 3.0 with options to support eMMC 4.41 interface, it allows host CPU to access SD and MMC devices.

The eMMC 5.0 Host Controller IP is a highly integrated host controller IP solution. This Host Controller IP handles all of the timing and interface protocol requirements to access these media ...

This UHS2PHY IP solution for UHS-II interface that SD Association is working on the standardization as the new ultra high speed interface for both SDHC and SDXC. By using this unique SerDes ...

This UHS2PHY IP solution for UHS-II interface that SD Association is working on the standardization as the new ultra high speed interface for both SDHC and SDXC. By using this unique SerDes ...

M31’s I/O Libraries now include integrated ESD cell designs for General I/O, eMMC I/Os, SDIOs, and ONFI I/O. We provide standard JEDEC ESD level and customized high-level ESD I/O across ...