English
You are here:
Crossbars Interconnect
An interconnect component connects initiators and targets in a system. A single initiator system simply requires a decoder and multiplexor, which are explained in the following sections. In a multi-initiator system, an interconnect is necessary for signal routing and arbitration between initiators to the proper target. This route is necessary for address, control, and write data signals. This specification does not include the specific methodologies implemented for multi-initiator systems, including single or multi-layer interconnects.
View Crossbars Interconnect full description to...
- see the entire Crossbars Interconnect datasheet
- get in contact with Crossbars Interconnect Supplier
Crossbars Interconnect IP
- Universal Chiplet Interconnect Express (UCIe) Controller
- UCIe/BoW BlueLynx™ Dual Mode PHY and subsystem IP for chiplet interconnect
- IP Solutions for the AMBA Interconnect
- Die-to-Die, High Bandwidth Interconnect PHY in TSMC (N7, N5)
- Universal Chiplet Interconnect Express (UCIe 1.0) Controller
- Die-to-Die (D2D) Interconnect