English
You are here:
Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier.
RFDA11C Driver Amplifier operates from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. The amplifier provides 15 dB small signal gain and 22 dBm of Output P1dB. The input and output are matched to 50 ohms with on-chip DC blocking capacitors. The device is specifically designed to use in point-to-point radios, cellular backhaul application, 5G RF Transceiver & SATCOM. The technology used to design DA is 0.1um GaAs pHEMT Process. Results are shown in datasheet with all parasitics & coupling effects at desired frequency.
View Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. full description to...
- see the entire Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. datasheet
- get in contact with Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier. Supplier
Block Diagram of the Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier.
Driver Amplifier IP
- The S13V33_CODEC_04 integrates: 2-channel 24bit sigma-delta ADC and 2-channel 24bit sigma-delta DAC with headphone driver amplifier.
- The CODEC integrates: 2-channel 24-bit sigma-delta ADC, 2-channel 24-bit sigma-delta DAC with headphone driver amplifier, and audio PLL to support a wide range of sample rates.
- 2-8GHz Driver Amplifier
- Driver Amplifier 8-16GHz
- 7-20 GHz Driver Amplifier
- 2 TO 6 GHz Driver Amplifier