English
You are here:
Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications.
RFFEM02C Front End Module operates from 2 – 7 GHz and can be used in S / C for Wi-Fi 6 & SATCOM applications. The input and output are matched to 50 ohms with on-chip DC blocking capacitors. The device is specifically designed to use in point-to-point radios for 5G RF Transceiver & SATCOM. The technology used to design front-end module is 0.1um GaAs pHEMT process. Results are shown in datasheet with all parasitics & coupling effects at desired frequency.
View Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications. full description to...
- see the entire Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications. datasheet
- get in contact with Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications. Supplier
Block Diagram of the Front End Module operating from 2 – 7 GHz and can be used in S / C band for Wi-Fi 6 & SATCOM applications.
Front End Module IP
- GaAs p-HEMT Monolithic integrated transceiver Front End Module suitable for 802.11b/g (2.4GHz) application
- Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications
- Intelligent Sensor and Power Management Design Platform
- LTE Release-10 Baseband Protocol Stack (L2-L3) SW IP
- IEEE 802.15.4- 2011 - MAC and PHY
- Digital and mixed-signal IP and ASIC RISC-V reference design for USB Type-C/PD power adapter/charger