English
You are here:
GP ULP Temperature Sensor in Silterra 0.18um
This macro-cell is an ultra-low-power, general purpose temperature sensor core. This IP features a built-in Sigma-Delta modulator that is responsible to convert the analog signals to digital bit stream.
This IP requires an external 80nA bias current and a 200kHz clock signal.
The core is easily retargeted to any other CMOS technology because it uses typical devices of standard CMOS technologies.
This IP requires an external 80nA bias current and a 200kHz clock signal.
The core is easily retargeted to any other CMOS technology because it uses typical devices of standard CMOS technologies.
View GP ULP Temperature Sensor in Silterra 0.18um full description to...
- see the entire GP ULP Temperature Sensor in Silterra 0.18um datasheet
- get in contact with GP ULP Temperature Sensor in Silterra 0.18um Supplier
Sensors & Actuators IP
- Capacitive Sensor - 3pF Sensibility, 460600kHz Output Frequency XFAB 0.35 μm
- Power Driver and Switch - High Voltage (30V), Load up to 20mA XFAB 0.35 μm
- General Purpose Temperature Sensor - Globalfoundries 22nm FD-SOI
- LIN 2.2, 2.1 and 1.3 Protocol Controller IP
- LIN Bus Master/Slave Controller Core
- LIN Bus Controller – Basic and Safety-Enhanced