English
You are here:
INNOLINK-B Controller
The INNOLINK Controller (ILC) combined with INNOLINK PHY is a complete solution for high speed data communication between dies or chips. INNOLIN, GDDR like, single ended, up to 20Gbps/pin, typical MCM or short PCB application, bump pitch 80um~150um.
The ILC can support interface access through the standard AMBA4 AXI bus interfaces. The register interface is connected to the ILC through the standard AMBA 3.0 or 4.0 APB bus interfaces.
The Controller issues commands compliant with the DFI protocol through the DFI interface to the PHY module, which sends command/data to the other die and receives command/data from the other die.
The ILC can support interface access through the standard AMBA4 AXI bus interfaces. The register interface is connected to the ILC through the standard AMBA 3.0 or 4.0 APB bus interfaces.
The Controller issues commands compliant with the DFI protocol through the DFI interface to the PHY module, which sends command/data to the other die and receives command/data from the other die.
View INNOLINK-B Controller full description to...
- see the entire INNOLINK-B Controller datasheet
- get in contact with INNOLINK-B Controller Supplier