English
You are here:
INNOLINK-C Controller
The INNOLINK-C Controller (hereinafter referred to as “ILC”) combined with INNOLINK-C PHY is a complete solution for high-speed data communication between dies or chips. INNOLINK-C IP is a GDDR-like, single ended IP, providing data rate of up to 24Gbps/pin, for typical MCM or short PCB applications.
The ILC can support interface access through the APL bus interfaces, while the register interface is connected to the ILC through the standard APB bus interfaces.
The ILC issues commands compliant with the DFI protocol through the DFI interface to the PHY module, transmitting/receiving command/data to/from the other die.
The ILC can support interface access through the APL bus interfaces, while the register interface is connected to the ILC through the standard APB bus interfaces.
The ILC issues commands compliant with the DFI protocol through the DFI interface to the PHY module, transmitting/receiving command/data to/from the other die.
View INNOLINK-C Controller full description to...
- see the entire INNOLINK-C Controller datasheet
- get in contact with INNOLINK-C Controller Supplier