English
You are here:
Ka Band power detector
The WEAKA01PD22G is a power detector capable of detecting signals in the range of 3 dBm to 18 dBm with an accuracy of +/-0.5 dB. It produces a voltage proportional to the received signal power with the maximum output voltage being 1.1 V. It consists of 2 parts, the RF and the Analog processing part. Multiplexing can also be used to support multiple RF inputs with minimal impact on the silicon area using the same analog part. The detector is ideal for detecting the envelope of modulated signals in the frequency range from 10 GHz to 80 GHz.
View Ka Band power detector full description to...
- see the entire Ka Band power detector datasheet
- get in contact with Ka Band power detector Supplier
Block Diagram of the Ka Band power detector IP Core
Ka Band IP
- Driver Amplifier operating from 35 - 46 GHz and can be used in Ka / V band applications or to drive the high-power amplifier
- Driver Amplifier operating from 35 - 39 GHz and can be used in Ka band applications or to drive the high power amplifier
- Front End Module operating from 24 – 30 GHz and can be used in low power Ka band applications
- Driver Amplifier operating from 37 - 40 GHz and can be used in Ka band applications or to drive the high-power amplifier.
- Buffer Amplifier operating from 25-62.5 GHz and can be used in Ka / V band application or to drive the high power amplifier.
- Driver Amplifier operating from 24-30 GHz and can be used in wide band application or to drive the high-power amplifier