English
You are here:
LTE Release-10 Baseband PHY. (L1) IP
This is a 3GPP Release 10 compliant LTE eNodeB PHY IP, which is a Macro cell LTE available for commercial deployment of LTE Networks and manufacturing.
Below is the Hardware specification for the LTE e-nodeB
Up to 4 Transmit and 4 Receive Antenna.
Radio Front end for TDD/ FDD mode.
10 Watts Radio output power per Antenna Port.
Synchronization via GPS and IEEE1588.
Four RJ45 connectors with 1G Ethernet support. Two SFP connector with 10G support.
Power Consumption: <240W
Enclosure: 4U Rack Mount
The solution includes an interactive configuration tool with which user can manage all standard configurations. There is also an integrated GUI to manage multiple NIB/ e-NodeB, configure
them and display KPIs from each of them. The solution supports SNMPv3 to integrate with NMS
tool to enable monitoring and configuration management.
Below is the Hardware specification for the LTE e-nodeB
Up to 4 Transmit and 4 Receive Antenna.
Radio Front end for TDD/ FDD mode.
10 Watts Radio output power per Antenna Port.
Synchronization via GPS and IEEE1588.
Four RJ45 connectors with 1G Ethernet support. Two SFP connector with 10G support.
Power Consumption: <240W
Enclosure: 4U Rack Mount
The solution includes an interactive configuration tool with which user can manage all standard configurations. There is also an integrated GUI to manage multiple NIB/ e-NodeB, configure
them and display KPIs from each of them. The solution supports SNMPv3 to integrate with NMS
tool to enable monitoring and configuration management.
View LTE Release-10 Baseband PHY. (L1) IP full description to...
- see the entire LTE Release-10 Baseband PHY. (L1) IP datasheet
- get in contact with LTE Release-10 Baseband PHY. (L1) IP Supplier