English
You are here:
MIPI CSI-2 v3.0 TRANSMITTER FOR COMBO C/DPHY
Features
- Compliant with MIPI CSI Standard v3.x, v2.x, v1.x and MIPI D-PHY Standard v1.x, MIPI D-PHY Standard V2.x and MIPI C- PHY V1.x
- Up to 3 Gsps per trio using C-PHY. 17Gbps in 3 Trios.
- Up to 2.5 Gbps per data lane of D-PHY (V2.0). 10Gbps in 4 Lanes
- Programmable 1, 2, 3 (C-PHY) or 4 (D-PHY) Data Lane Configuration.
- Configurable up to 4 Virtual Channels
- Operate in continuous and non-continuous clock modes.
- Color Modes: 16, 18, 24 and 36 bpp
- Color Formats: YUV420 8, 10bits and without CSPS and Legacy, YUV422 8, 10bits, RGB-888, 565, 666, 555 and 444. RAW6, 7, 8, 10, 12 and 14.
- Register configuration through CCI interface
- Host Interface can be Pixel or AXI interface.
View MIPI CSI-2 v3.0 TRANSMITTER FOR COMBO C/DPHY full description to...
- see the entire MIPI CSI-2 v3.0 TRANSMITTER FOR COMBO C/DPHY datasheet
- get in contact with MIPI CSI-2 v3.0 TRANSMITTER FOR COMBO C/DPHY Supplier
Block Diagram of the MIPI CSI-2 v3.0 TRANSMITTER FOR COMBO C/DPHY
Csi IP
- MIPI CSI DSI C-PHY IP for TSMC (5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm)
- MIPI CSI DSI Controller - CPHY CSI-2 Transmitter v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.
- MIPI D-PHY Universal Tx / Rx v1.1 @1.5ghz Ultra Low Power for IoT & Wearables
- MIPI D-PHY Receiver for TSMC 40nm LP
- CSI2 TX; Camera Serial Interface, MIPI Compliant
- CSI2 RX; Camera Serial Interface, MIPI Compliant