MIPI DPHY2.0/CPHY1.1 TX (support combo TTL, LVDS, HiSPI)
The D-PHY is built in with a standard digital interface to talk to any third-party host controllers.
The C-PHY is designed to coexist on the same IC pins as D-PHY so that dual-mode devices could be developed with low power signaling similar to D-PHY.
The D-PHY and C-PHY support the electrical portion of MIPI D-PHY V1.2 standard and MIPI C-PHY V1.1 standard, covering all transmission modes (ULP/LP/HS). Innosilicon MIPI C/D PHY TX enables a seamless implementation allowing interfaces to D-PHY based sensors or C-PHY based sensors. This IP cost-effectively adds MIPI D-PHY and MIPI C-PHY capability to any SoC used in communication and consumer electronics field.
The Innosilicon I/O and ESD are also built-in as one in a rectangular footprint for any configuration. It is optimized for high-speed applications with robust timing and small silicon area.
View MIPI DPHY2.0/CPHY1.1 TX (support combo TTL, LVDS, HiSPI) full description to...
- see the entire MIPI DPHY2.0/CPHY1.1 TX (support combo TTL, LVDS, HiSPI) datasheet
- get in contact with MIPI DPHY2.0/CPHY1.1 TX (support combo TTL, LVDS, HiSPI) Supplier