English
You are here:
NFC/RFID Transceiver
The NFC transceiver IC is intended for adding NFC functionality to mobile devices and other applications having embedded MCU. The device can perform in one of three modes: RFID/NFC reader, NFC Peer, or Card Emulation mode.
NT1045 is composed of an integrated RF front-end, SPI interface for communications with MCU, 128-byte FIFO for payload data, and RFID framing engine supporting ISO15693, ISO14443A*, ISO14443B and NFCIP standards.
Extension of standards set and implementation of custom RFID protocols can be achieved by using direct modes with MCU-controlled bit coding and framing. Direct access to RF Frontend control registers allows fine tuning of various parameters at physical layer.
* The costs of intellectual property licenses under applicable patents belonging to NXP Semiconductors are not included in this NTLab product. If you plan to use and/or enable the ISО/IEC 14443A protocol please contact NXP Semiconductors for the appropriate patent license via an inquiry to the following:
- NXP Semiconductors
- Intellectual Property & Licensing Department
Attn: Aaron Waxler (ааrоn.wахlеr@nхр.соm)
NT1045 is composed of an integrated RF front-end, SPI interface for communications with MCU, 128-byte FIFO for payload data, and RFID framing engine supporting ISO15693, ISO14443A*, ISO14443B and NFCIP standards.
Extension of standards set and implementation of custom RFID protocols can be achieved by using direct modes with MCU-controlled bit coding and framing. Direct access to RF Frontend control registers allows fine tuning of various parameters at physical layer.
* The costs of intellectual property licenses under applicable patents belonging to NXP Semiconductors are not included in this NTLab product. If you plan to use and/or enable the ISО/IEC 14443A protocol please contact NXP Semiconductors for the appropriate patent license via an inquiry to the following:
- NXP Semiconductors
- Intellectual Property & Licensing Department
Attn: Aaron Waxler (ааrоn.wахlеr@nхр.соm)
View NFC/RFID Transceiver full description to...
- see the entire NFC/RFID Transceiver datasheet
- get in contact with NFC/RFID Transceiver Supplier
NFC IP
- Passive/active NFC transceiver
- ISO/IEC 14443 type A/B Analog Front End (AFE) compliant with the NFC standards
- ISO/IEC 14443 type A/B dual-interface Analog Front End (AFE) compliant with the NFC standards
- NFC transceiver compliant with the ISO 14443-A, ISO 14443-B, ISO 18092 and ISO 15693 standards
- NFC/RFID Controller
- NAND Flash Controller