English
Process Detector (For DVFS and monitoring process variation), TSMC N7
You are here:
Programmable Low Pass Filter
The WEA50175LPF18CH322G is a leapfrog low pass filter with programmable cut-off frequency. The filter response is 3rd order Chebyschev. The low pass filter cutoff frequency can be selected from 40 MHz to 175 MHz. The resistors and the capacitors are programmable (6-bit and 4-bit respectively) and can be calibrated to minimize the low pass cutoff frequency accuracy due to process variation.
View Programmable Low Pass Filter full description to...
- see the entire Programmable Low Pass Filter datasheet
- get in contact with Programmable Low Pass Filter Supplier
Block Diagram of the Programmable Low Pass Filter IP Core
Programmable IP
- 512x8 Bits OTP (One-Time Programmable) IP, TSM- 12FFC 0.8V/1.8V Process
- Multi Standard programmable SERDES PHY with single/multi-lane configurations with support of long-reach channel
- ARC EV Processors are fully programmable and configurable IP cores that are optimized for embedded vision applications
- Programmable Low Power V-by-One SERDES - GLOBALFOUNDRIES 65 65G
- 4Kx8 Bits OTP (One-Time Programmable) IP, GLOBA-FOUNDR---® 22nm FDX 0.8V/1.8V Process
- Linear Li-Ion Battery Charger - Programmable charging current up to 1.1A Fast Charge in SilTerra 0.18um