SMIC 0.13um USB 1.1 PHY

The USB1.1 PHY is an IP version of USB transceiver designed in standard logic to interface the physical layer of Universal Serial Bus. It receives data via DP and DM and transfers data to USB1.1 core via RCV, VM and VP, capable of transmitting and receiving serial data at either full speed (12M bit/s) or low speed (1.5M bit/s) data rate. The serial interface engine (SIE) controls the state of USB1.1 PHY through the OEN signal. When in receiving mode, it receives data at the USB1.1 PHY output RCV, VM and VP; when in transmitting mode, it drives the USB1.1 PHY input VPO and VMO.

• see the entire SMIC 0.13um USB 1.1 PHY datasheet
• get in contact with SMIC 0.13um USB 1.1 PHY Supplier