English
ARC-V RMX-500 power efficient 32-bit RISC-V processor for embedded applications
You are here:
Ultra-Low-Power Bandgap Voltage Reference in 40nm CMOS
The ODT-REF-40LP-SV1P8-ULP140N is an ultra-low power CMOS bandgap reference designed in a 40nm standard CMOS process without needing the use of any bipolar devices. This IP operates over a temperature range of -40 to 125C while taking less than 200nA from the supply, with a nominal current of 140nA. A single room temperature trim can be used to achieve a temperature coefficient less than 40ppm/C.
View Ultra-Low-Power Bandgap Voltage Reference in 40nm CMOS full description to...
- see the entire Ultra-Low-Power Bandgap Voltage Reference in 40nm CMOS datasheet
- get in contact with Ultra-Low-Power Bandgap Voltage Reference in 40nm CMOS Supplier
Block Diagram of the Ultra-Low-Power Bandgap Voltage Reference in 40nm CMOS
Analog & Mixed Signal IP
- The tADC106-SW1-LR.01 is a mixed (analog and digital) Virtual Component (ViC) containing a three-channel ADC and additional functions offering an ideal mixed signal front end for low power and high quality audio applications.
- 7-bit, 64 GSPS ADC Ultra Low Power
- USB2.0 Host Transceiver PHY
- Analog Front End: 2x 12-bit 4 GSPS IQ ADCs, 2x 12-bit 8GSPS IQ DACs, bandgap, temp sensor, PLL, 4 x LDO
- Fibre-Channel Transceiver
- PCI Express PHY serial link PIPE Transceiver IP cell/hard macro