UltraScale / UltraScale+ Interlaken

The Xilinx® LogiCORE™ IP UltraScale™ architecture integrated IP core for Interlaken is a scalable chip-to-chip interconnect protocol designed to enable the following for use in select UltraScale architectures:

* The lane logic only mode allows each serial transceiver to be used to build a fully featured Interlaken interface. In devices with 48 serial transceivers, up to 600 Gb/s of total throughput can be sustained.
* The protocol logic supported in each integrated IP core scales up to 150 Gb/s. The Interlaken integrated IP core solution is designed to be compliant with Interlaken Protocol Definition, Revision 1.2, October 7, 2008.
* The integrated IP core implements both the lane logic and protocol logic portions of the specification, which saves approximately 60k+ System Logic Cells per instantiation and uses about 1/8th the power of equivalent soft implementations.

• see the entire UltraScale / UltraScale+ Interlaken datasheet
• get in contact with UltraScale / UltraScale+ Interlaken Supplier