UMC L90G 90nm DDR DLL - 108MHz-540MHz

The DDR DLL uses a reference clock to establish a time base in order to delay arbitrary (nonperiodic) strobe signals by precise fractions of the clock cycle. It uses a phase-locked analog delay line which rejects temperature and supply voltage variations, and has high supply noise rejection for very low jitter operation.

TCI can configure this block to have almost any number of slaves (which delay the arbitrary signals) with a single master section (which establishes the time base) to minimize area and power. The slave delays can be independently set to precise values or dynamically adjusted after determining the boundaries of a data eye. The DDR DLL has excellent linearity and very high resolution.

TCI can also configure this block to output multi-phase clocks directly from the reference clock.

• see the entire UMC L90G 90nm DDR DLL - 108MHz-540MHz datasheet
• get in contact with UMC L90G 90nm DDR DLL - 108MHz-540MHz Supplier