English
Process Detector (For DVFS and monitoring process variation), TSMC N7
You are here:
USB 2.0 CONTROLLER IP CORE
The AL-USB2D-CTRL fully synthesizable core implements a complete high/full-speed (480Mbps/12Mbps) peripheral controller that interfaces to a UTMI USB port transceiver on one side and to a system’s microprocessor on the other. It is user-configurable for up to 15 IN and OUT endpoints, and includes power management and remote wake-up functions.
Options include a protocol aware DMA controller, support for a variety of widely used bus interfaces, and a UTMI Low Pin Interface (ULPI).
Designed for easy reuse in ASIC and FPGA implementations, the microcode-free design is strictly synchronous with positive-edge clocking, no internal tri-states and a synchronous reset; therefore scan insertion is straightforward. The core has been optimized and silicon proven on Xilinx and Altera FPGAs.
Options include a protocol aware DMA controller, support for a variety of widely used bus interfaces, and a UTMI Low Pin Interface (ULPI).
Designed for easy reuse in ASIC and FPGA implementations, the microcode-free design is strictly synchronous with positive-edge clocking, no internal tri-states and a synchronous reset; therefore scan insertion is straightforward. The core has been optimized and silicon proven on Xilinx and Altera FPGAs.
View USB 2.0 CONTROLLER IP CORE full description to...
- see the entire USB 2.0 CONTROLLER IP CORE datasheet
- get in contact with USB 2.0 CONTROLLER IP CORE Supplier
Block Diagram of the USB 2.0 CONTROLLER IP CORE IP Core
