English
You are here:
USB 2.0 Device with FIFO Interface (USB20HF)
The USB 2.0 Device with FIFO Interface (USB20HF) IP Core supports ULPI interface with Bulk IN and Bulk OUT endpoints. The core supports three preconfigured endpoints Control, Bulk IN, and Bulk OUT. It is Configurable for up to 15 IN/OUT endpoints on customer request on chargeable basis1. Each configurable endpoint has an endpoint controller that supports Interrupt, Bulk, and Isochronous transfers. The USB 2.0 Device IP communicates with the Host through FIFO interface. The core supports both High Speed (480 Mbps) and full Speed (12 Mbps) functionality.
View USB 2.0 Device with FIFO Interface (USB20HF) full description to...
- see the entire USB 2.0 Device with FIFO Interface (USB20HF) datasheet
- get in contact with USB 2.0 Device with FIFO Interface (USB20HF) Supplier
Block Diagram of the USB 2.0 Device with FIFO Interface (USB20HF)
usb IP
- HDCP 2.3 Embedded Security Modules on DisplayPort/USB Type-C
- USB 2.0 PHY TSMC 5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm, 65nm, 130nm, 180nm
- USB 2.0 PHY GlobalFoundaries 12nm, 22nm, 28nm, 40nm
- Multi-protocol SerDes PMA
- Complete USB Type-C Power Delivery PHY, RTL, and Software
- USB 2.0 OTG High / Full / Low- Speed Dual Role IP Core