How to achieve 1 trillion floating-point operations-per-second in an FPGA

Michael Parker, Altera Corporation
EETimes (9/14/2010 2:56 PM EDT)

Based on recent technological developments, high-performance floating-point signal processing can, for the very first time, be easily achieved using FPGAs. To date, virtually all FPGA-based signal processing has been implemented using fixed-point operations. This article describes how floating-point technology in FPGAs is not only practical today, but that the processing rates of one trillion floating-point operations per second (teraFLOPS) are feasible and can be implemented on a single FPGA die.What’s changed?

Recently announced 28-nm FPGAs can enable much higher levels of both fixed- and floating-point digital signal processing (DSP) than ever before. A key aspect of this is the new and innovative variable-precision DSP architecture that efficiently supports both fixed- and floating-point implementations.

FPGA resources and architecture are by themselves are not sufficient to build floating point designs. Verilog and VHDL have poor to basically non-existent support for floating-point representation. There are no synthesis tools available today that support floating point. However, the traditional approach that is used in floating-point processors will not work with FPGAs. Therefore, a new “fused-datapath” toolflow has been designed to specifically build floating-point datapaths while taking into account the hardware implementation issues inherent in FPGAs. This design tool allows designers, for the first time, to create high-performance floating-point implementations of large FPGA designs.

Click here to read more ...

E-mail This Article

Printer-Friendly Page