Address jitter and noise more effectively with DDR4, part1

Perry Keller, Agilent Technologies
EETimes (5/21/2013 12:15 PM EDT)

The latest generation of DDR memory, DDR4, doubles the speed of the current generation of DRAMs, DDR3, with end-of-life data rates of 3.2 GT/s. Compared to the first generation of DDR memory, which started out at 200 MT/s, DDR4 will be running almost 16 times faster. When DDR was first introduced thirteen years ago, the typical semiconductor feature size was 130 nm and a 2.5-V operating voltage was the standard. Now, devices promise to approach 14 nm feature sizes and 1 V operating voltages. The DRAM specs need to keep up. As DDR3 speeds approached 1600 MT/s and the DRAM data valid windows shrank from 800 ps at 600 mV to less than 60 ps at 270 mV, the DDR4 standards development team recognized the need to take a new approach.

To address the challenges posed by higher data rates, the DDR4 specification (JESD79-4) adopts several proven strategies from modern high-speed serial specifications like PCI Express and Super Speed USB. In fact, the DDR4 specification takes things one step further by providing a way for designers to allocate the system timing and noise budget between the controller, memory interconnect and the DRAM that is difficult, if not impossible, to accomplish with other high speed-interfaces.

Click here to read more ...

E-mail This Article

Printer-Friendly Page