|
|||||||||||||||
Addressing MIPI M-PHY connectivity challenges for more efficient testingChris Loberg, Tektronix As the industry moves to adopt the MIPI Alliance's M-PHY standard, designers are encountering some significant challenges related to oscilloscope measurements and, more specifically, probing. These challenges include strict requirements such as bus termination and input return loss, as well as the need to minimize common mode loading on the device under test (DUT) and signal fidelity requirements such as wide bandwidth, low noise, and high sensitivity. The intent of this article is to provide information that will increase your chances of accurate and repeatable test results to ensure compliance with the standard. We will first review the requirements of the M-PHY standard relevant to oscilloscope probing, discuss the tests required in the M-PHY Physical Layer Conformance Test Suite (CTS), and provide practical examples of M-PHY probing with currently available oscilloscopes and probes.
|
Home | Feedback | Register | Site Map |
All material on this site Copyright © 2017 Design And Reuse S.A. All rights reserved. |