|
|||||||||||||||
DFT strategy for IPsChintan Panchal, eInfochips Abstract IPs (Building blocks of ASIC/SoC e.g. CPU, GPU) build and sign off in a wider sense. It doesn’t always mean Chip Timing, Design Rule Constraints & Power Closure of a block, but also refers to the creation of a layout/partition around the delivered build/sign off IPs/blocks. This would further refer to flows that are planned, library composition, various floorplan styles and shapes. The conflicts encountered in DFT and its equivalent solution, experienced during IP Block build (Hardening) are discussed in this paper. CPU - IP Block build (Hardening) accumulates many new DFT Flows & Methodologies for this purpose. 1- Introduction Semiconductor companies typically face situations of unpredictable complexity during large chip design work which forces design engineers to switch to a fire-fighting mode rather than focusing on core design activities. While there are several methodologies used to tackle the challenges, System-on-chip (SoC) design, as a tried-and-tested methodololgy, has seen great success in large chip design. Simplicity is the key here: The SoC methodology involves the usage of predesigned and preverified blocks which are sourced from in-house teams or/and outside contractors which when combined together, becomes semiconductor intellectucal property (IP). This greatly reduces development test cycle time thus, ensuring faster time-to-market for the final product.
|
Home | Feedback | Register | Site Map |
All material on this site Copyright © 2017 Design And Reuse S.A. All rights reserved. |