High bandwidth memory (HBM) PHY IP verification

Ankit Sheth & Jignesh Oza (eInfochips)
EDN (February 23, 2016)

Memory systems have evolved a lot in the previous few years due to advancements in fabrication technology. High Bandwidth Memory (HBM) is an example of the latest kind of memory chips which can support low power consumption, ultra-wide communication lanes, and stacked configurations. HBM subsystems involve different types of memory controllers (full-speed, half-speed), HBM PHY, and HBM DRAM. The HBM subsystem is suitable for applications involving high performance graphics and computing, high end networking and communication devices, and memory-hungry processors. Because of their critical end-application role, it is crucial to verify all design components involved in HBM subsystems. Here, we will discuss the role of the HBM PHY, along with the major verification aspects/challenges.

Introduction

The HBM PHY is a key element in an overall HBM system solution. HBM PHY generally receives HBM DRAM row-col commands, data, parity, etc. from memory controllers through DFI interfaces and passes them to HBM memory along with the use of HBM DRAM interface. It deals with two different interfaces and supports multiple frequency ratios for DFI interfaces. HBM PHY is ideally required to support all HBM memory features like frequency ratios, data rates, memory sizes, pseudo channel modes, legacy modes, DBI,DM etc. HBM PHY can be verified at the sub-system level and block level with different, vendor-specific memory controllers and HBM memories.

Click here to read more ...

E-mail This Article

Printer-Friendly Page