|
||||||||||
FS2 Introduces SB NAVIGATOR™ Trace Tools For Sonics SiliconBackplane SMART InterconnectBus fabric-level debug for Complex SoC development PORTLAND, OR, June 1, 2005 -- First Silicon Solutions (FS2®) announced today the availability of the FS2 SB Navigator, a comprehensive trace and debug solution supporting Sonics® SiliconBackplane™ SMART Interconnects™. SB Navigator is a component of the Bus Navigator suite of FS2 products used for system-level debug of complex embedded systems. “SB Navigator provides much needed visibility into the dynamics of SoC data flows that is critical for architectural exploration, and also helps Sonics in its initiative to advance reference design flows for its SMART Interconnects.” says Drew Wingard, chief technology officer for Sonics. SB Navigator provides SoC developers with the critical bus-level visibility needed to simplify and facilitate analysis of core-level intercommunications when developing complex SoCs. The versatility of SB Navigator makes it an effective solution for hardware testing and integration, handshaking and protocol optimizations, BIOS development, and firmware/software development. SB Navigator consists of an on-chip instrumentation (OCI) block that connects through the SiliconBackplane snoop port to provide in silicon-based triggering and trace, along with support for JTAG probe control and display system analysis software intercommunications. SB Navigator can be used standalone, or as part of FS2’s Multi-core Embedded Debug (MED) on-chip instrumentation environment for embedded silicon, which includes multi-core system HyperDebug™ blocks, processor-specific in system analyzer blocks, and other bus and logic specific instrumentation options. “When designing with state-of-the-art, high performance intelligent internal interconnects, such as SiliconBackplane, there is a need for new types of debug and analysis tools to visualize the internal workings of these very sophisticated SoCs. FS2 utilized Sonics’ vast system knowledge to help provide a highly attractive feature set for our Navigator tools,” said Rick Leatherman, president of First Silicon Solutions. FS2 SB Navigator key features: The silicon overhead of SB Navigator in a design is as low as 30K gates, plus a user defined amount of on-chip RAM for trace. SB Navigator supports bus alignment trace mode, which allows multi-cycle bus operations to be triggered and viewed as a simplified single cycle transaction. SB Navigator can also optionally filter trace to exclude idle or other unwanted bus cycles. SB Navigator is supported by FS2s’ System Navigator, a compact chassis probe that connects to the target system using a 14-pin debug connector. The System Navigator runs on a Windows® 2000/XP PC over a USB 2.0 port or optional 10/100 Ethernet connection. The System Navigator OE (original edition) uses a USB 1.1 or IEEE-1284 EPP/ECP high-speed parallel port. Availability About First Silicon Solutions (FS2) Sonics is a registered trademark and SMART Interconnects, and SiliconBackplane are trademarks of Sonics, Inc.. All other trademarks are the property of their respective owners.
|
Home | Feedback | Register | Site Map |
All material on this site Copyright © 2017 Design And Reuse S.A. All rights reserved. |