|
||||||||||
Xilinx and Tensilica Announce Configurable Processor Support for Programmable Systems DesignXilinx Virtex-II Series FPGAs boost processor emulation board performance by over 50% SAN JOSE, Calif., October 16, 2002 - Xilinx, Inc. (NASDAQ: XLNX) and Tensilica, Inc., a new Xilinx AllianceCOREā¢ program member, today announced that Tensilica's Xtensa-V configurable processors now support Xilinx FPGAs. Leveraging Tensilica's web-based Processor Generator and the new Virtex-II-based XT2000-X processor emulation system, system designers can now iterate, implement, and debug custom Xtensa processor configurations and view the results in Xilinx FPGAs within hours. Designers can run Xtensa processor emulations in real hardware at speeds closer to actual system requirements, given the Virtex-II-based emulation board runs 50% faster than previous Tensilica FPGA emulation boards. "Tensilica has made evaluation of Xtensa core configurations fast and easy now that their configuration tool and the XT2000-X emulation board supports the Xilinx design flow. It has dramatically reduced our development time," said Toshiaki Ohno, senior manager at NEC's IP Network Division. "The short compile times we get with the Xilinx ISE software is a great advantage, and we are able to achieve higher performance using the Xilinx emulation system than previous emulation boards." "We are impressed by the capabilities of the Virtex-II devices from Xilinx," said Steve Roddy, director of product marketing at Tensilica. "We configured the Xtensa processor to accelerate an MPEG-4 decoder system and created a demonstration for a recent trade show running real-time video and audio decode implemented fully in software running on the Xtensa processor on our board. This really showcases the power and performance of our configurable, extensible processor and the new Xilinx emulation system." Fully Programmable Design Flow Tensilica customers who purchase the XT2000-X emulation system receive fully automated support for the emulation board through the Processor Generator. The generator creates the RTL source code for the Xtensa processor and associated interface logic for the emulation platform and then automatically runs the design through the Xilinx ISE design software to generate the programming files for the emulation board. Designers can now create a new processor and go from concept to hardware in a matter of hours. Programmable Systems Support Availability About Tensilica About Xilinx
|
Home | Feedback | Register | Site Map |
All material on this site Copyright Ā© 2017 Design And Reuse S.A. All rights reserved. |