|
||||||||||
90% Reduction in power consumption for RFID chips with Dolphin Integration's SESAME eLC standard cell libraryGrenoble, France -- October 23, 2017 -- The challenge of improving the RFID reader detection range and thus the identification rate induce that the chips must be able to operate at extremely low voltage, as the energy caught by the antenna is lowered. This challenge leads to consider every mean to reduce the RFID chips power consumption. One of the main way to do so is to optimize the digital part of the design. The new generation of SESAME eLC standard-cell library at 180 nm is designed to safely operate near threshold voltage, down to 0.68 V +/- 10%, to provide up to 90% of power savings at 1.3 MHz compared to the sponsored library. Such a comparison must be based on the Motu-Uta benchmark to provide an objective metric to quickly assess the expected improvement. Picture 1: SESAME eLC compared to a conventional standard-cell library (Dynamic Power Consumption versus Frequency) at 180 nm RFID process. Discover our SESAME eLC standard cell library at 180 nm For further information, sign-in into MyDolphin, your private space for products evaluation kit. About Dolphin Integration Dolphin Integration contributes to "enabling low-power Systems-on-Chip" for worldwide customers - up to the major actors of the semiconductor industry - with high-density Silicon IP components best at low-power consumption. Over 30 years of experience in the integration of silicon IP components, providing services for ASIC/SoC design and fabrication with its own EDA solutions, make DOLPHIN Integration a genuine one-stop shop addressing all customers' needs for specific requests.
|
Home | Feedback | Register | Site Map |
All material on this site Copyright © 2017 Design And Reuse S.A. All rights reserved. |