New Semiconductor Fabs to Spur Surge in Equipment Spending, SEMI Reports

MILPITAS, Calif. — June 28, 2021 — Semiconductor manufacturers worldwide will have started construction on 19 new high-volume fabs by the end of this year and break ground on another 10 in 2022 to meet accelerating demand for chips across a wide range of markets including communications, computing, healthcare, online services and automotive, SEMI highlighted today in its quarterly World Fab Forecast report.

China and Taiwan will lead the way in the new fab construction starts with eight each, followed by the Americas with six, Europe/Mideast with three, Japan and Korea with two each (Figure 1). Fabs that produce 300mm wafers will account for most of the new facilities – 15 – in 2021 and again in 2022, when seven fabs will begin construction. The remaining seven fabs planned over the two-year period will be 100mm, 150mm and 200mm facilities. The 29 fabs could produce as many as 2.6 million wafers per month (in 200mm equivalents).“Equipment spending for these 29 fabs is expected to surpass $140 billion over the next few years as the industry pushes to address the global chip shortage,” said Ajit Manocha, SEMI president and CEO. “In the medium and longer term, the fab capacity expansion will help meet projected strong demand for semiconductors stemming from emerging applications such as autonomous vehicles, artificial intelligence, high-performance computing, and 5G to 6G communications.”

Figure 1: Projected fab construction starts

Projected Fabs by Sector and Technology

Of the 29 fabs starting construction in 2021 and 2022, 15 are foundry facilities with capacities ranging from 30,000 to 220,000 wafers per month (200mm equivalents). The memory sector will begin construction on four fabs over the two-year span. Those facilities will boast higher capacities ranging from 100,000 to 400,000 wafers per month (200mm equivalents).

Of the semiconductor makers beginning construction of new fabs this year, many won’t start installing equipment until 2023 since it takes up to two years after ground is broken to reach that phase, though some could begin equipping as soon as the first half of next year.

While the World Fab Forecast shows 10 high-volume fabs starting construction next year, that number is likely to climb as chipmakers announce new facilities. The report tracks investments for fab construction and fab equipment, in addition to capacities, products and technologies from 2021 through 2022.

In addition to the 29 fabs expected to begin construction in 2021 and 2022, the World Fab Forecast report tracks eight low-probability projects that could start construction over the same period.

About SEMI

SEMI^® connects more than 2,400 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Technology Communities, defined communities within SEMI focused on specific technologies. Visit www.semi.org to learn more