English
You are here:
0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current)
55TSMC_BGV_02 is a reference voltage and current source that consists of bandgap voltage reference, voltage-to-current converter and current-voltage buffer. Voltage-to-current converter is based on external resistor and thus could be considered as process and temperature independent current reference. The bandgap produces on pin out voltage level around 0.6V, which adjusted by a trimming codes. Bandgap Voltage-to-Current (V2I) converter generates required 10uA/20uA nominal values of reference current to analog blocks.
View 0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current) full description to...
- see the entire 0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current) datasheet
- get in contact with 0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current) Supplier
Bandgap IP
- Analog Front End: 2x 12-bit 4 GSPS IQ ADCs, 2x 12-bit 8GSPS IQ DACs, bandgap, temp sensor, PLL, 4 x LDO
- Low-Power Combo Bandgap Voltage and Current References (1.21V/600nA) - GlobalFoundries 0.13um BCD
- Bandgap Voltage Reference (0.6V and 0.8V References)
- Bandgap
- Integrated Bandgap - TSMC 7FF
- Bandgap - TSMC CLN3A