English
You are here:
I2S/TDM Serial Audio Interface with Asynchronous Sample Rate Conversion
The IPB-I2S-TDM-ASRC combines an I2S/TDM configurable serial audio interface with two embedded stereo Asynchronous Sample Rate Converters (ASRCs).
The ASRCs can provide very high quality in terms of harmonic distortion and noise, tolerance and rejection of input jitter. When sample rate conversion is not necessary, the ASRCs can be bypassed.
The I2S/TDM supports the well-known stereo formats: I2S, Left-Justified or Right-Justified and many configurable TDM formats up to 256 channels.
The backend interface is supplied with a choice of AMBA-AHB, AMBA-APB or a parallel interface.
The ASRCs can provide very high quality in terms of harmonic distortion and noise, tolerance and rejection of input jitter. When sample rate conversion is not necessary, the ASRCs can be bypassed.
The I2S/TDM supports the well-known stereo formats: I2S, Left-Justified or Right-Justified and many configurable TDM formats up to 256 channels.
The backend interface is supplied with a choice of AMBA-AHB, AMBA-APB or a parallel interface.
View I2S/TDM Serial Audio Interface with Asynchronous Sample Rate Conversion full description to...
- see the entire I2S/TDM Serial Audio Interface with Asynchronous Sample Rate Conversion datasheet
- get in contact with I2S/TDM Serial Audio Interface with Asynchronous Sample Rate Conversion Supplier
Block Diagram of the I2S/TDM Serial Audio Interface with Asynchronous Sample Rate Conversion
Digital Audio IP
- Digital audio PDM-to-PCM converter with 117 dB Dynamic Range and Dual-phase alignment
- I2S/Left-Justified/TDM Digital Audio Interface
- 16-22Bit 97dB Stereo Audio CODEC with Linein/Digital and Analog Microphone Recording, Lineout/Headphone/Speaker Playback, SMIC 65nmll
- 24-bit pure digital audio CODEC with 100 dB SNR stereo PDM-to-PCM and up to 110 dB SNR stereo PWM DAC with ASRC
- 100 dB of SNR, 24-bit stereo audio CODEC with headphone driver and digital mixer
- Dolby Digital/AC-3/MPEG Audio Decoding Core