English
You are here:
I3C
I3C (Improved Inter Integrated Circuit), which is enhanced with I2C protocol, and compatible with I2C. It adds new functions, including higher transmission speed, in-band interrupt, CRC check, and so on. Now, the I3C protocol is divided into MIPI and JEDEC. Usually, MIPI I3C is applied in sensor/IoT data transmission, and JEDEC I3C is applied in storage chip configuration.
Innosilicon I3C IP supports I3C master/slave functions, compliant with JESD403-1B and MIPI I3C. Users read and write the internal registers through the APB3.0 interface, and DMA is also supported for internal data buffer write or read. I3C Master converts the parallel data, which are configured by the users, into SDL/SDA serial data. At the same time, I3C Slave converts the data of register reading and writing into SCL/SDA.
Innosilicon I3C IP supports I3C master/slave functions, compliant with JESD403-1B and MIPI I3C. Users read and write the internal registers through the APB3.0 interface, and DMA is also supported for internal data buffer write or read. I3C Master converts the parallel data, which are configured by the users, into SDL/SDA serial data. At the same time, I3C Slave converts the data of register reading and writing into SCL/SDA.
View I3C full description to...
- see the entire I3C datasheet
- get in contact with I3C Supplier