English
You are here:
MIPI DSI Receiver Controller v1.3
The Arasan DSI Device Controller IP is designed to provide MIPI compliant high speed serial connectivity for mobile display modules with Type 1 to 4 architectures. Serial connectivity to the mobile applications processor’s DSI host is implemented using 1 to 4 D-PHY’s (also available from Arasan), depending on display bandwidth needs. This IP connects to the D-PHY’s through the PPI interface.
Display modules consist of display driver logic driving display signals onto a display device or panel. On the display driver side, Arasan’s DSI Device Controller provides the DBI Interface for Types 1 to 3 display modules, and the DPI Interface for Types 2 to 4 displays.
Initial configuration of this IP can be done through programmed IO over the AHB bus, however, other bus interfaces can be provided upon request.
Display modules consist of display driver logic driving display signals onto a display device or panel. On the display driver side, Arasan’s DSI Device Controller provides the DBI Interface for Types 1 to 3 display modules, and the DPI Interface for Types 2 to 4 displays.
Initial configuration of this IP can be done through programmed IO over the AHB bus, however, other bus interfaces can be provided upon request.
View MIPI DSI Receiver Controller v1.3 full description to...
- see the entire MIPI DSI Receiver Controller v1.3 datasheet
- get in contact with MIPI DSI Receiver Controller v1.3 Supplier
Block Diagram of the MIPI DSI Receiver Controller v1.3 IP Core
DSI Device IP
- MIPI DSI Transmit Controller v1.3
- MIPI CSI DSI Controller - CPHY CSI-2 Transmitter v 2.1, Compatible with MIPI C-PHY v1.2 & DPHY v2.1.
- MIPI D-PHY Universal Tx / Rx v1.1 @1.5ghz Ultra Low Power for IoT & Wearables
- MIPI DSI-2 Transmitter Interface IP
- MIPI DSI-2 Receiver Controller v1.0
- MIPI DSI TX Controller