English
USB 2.0 PHY TSMC 5nm, 6/7nm, 12/16nm, 22nm, 28nm, 40nm, 65nm, 130nm, 180nm
You are here:
Parallel FIR Filter
Many digital systems use filters to remove noise, provide spectral shaping, or perform signal detection. Two common filters that provide these functions are Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) filters. IIR filters are used in systems that can tolerate phase distortion. FIR filters are used in systems that require linear phase and have an inherently stable structure. For this reason, FIR filters are designed into a large number of systems.
The Parallel FIR Filter core can perform filtering with zero latency and is well suited for real-time applications. The core supports two modes of computation/filtering: single-cycle and multi-cycle. In single-cycle, filtering is done in one clock cycle and in multi-cycle, filtering is accomplished in multiple clock cycles.
The Parallel FIR Filter core can perform filtering with zero latency and is well suited for real-time applications. The core supports two modes of computation/filtering: single-cycle and multi-cycle. In single-cycle, filtering is done in one clock cycle and in multi-cycle, filtering is accomplished in multiple clock cycles.
View Parallel FIR Filter full description to...
- see the entire Parallel FIR Filter datasheet
- get in contact with Parallel FIR Filter Supplier
Block Diagram of the Parallel FIR Filter IP Core
FPGA IP
- RT-630-FPGA Hardware Root of Trust Security Processor for Cloud/AI/ML SoC FIPS-140
- Complete USB Type-C Power Delivery PHY, RTL, and Software
- Ethernet TSN Switch IP Core - Efficient and Massively Customizable
- CXL 2.0 Agilex FPGA Acclerator Card
- PCIe Gen3 to SRIO Gen3 Bridge (FPGA)
- Secure-IC's Securyzr(TM) AES-GCM Multi-Booster Réduire la liste des FPGA aux noms des gammes